Control Solutions

Sub-Categories
CR-CS2

CR-CS2 IP to Relay, IR, & RS-232 Controller

​The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the WebGUI or by telnet, eight of which can also be activated by the external trigger connectio...
CR-KP1

CR-KP1 Wall-mount keypad Control System

The CR-KP1 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy to use device. ...
CR-KP2

CR-KP2 9 Button Wall-Mount Keypad Control System

​The CR-KP2 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy to use devic...
CR-KP3

CR-KP3 Wall-Mount Keypad Control System (Euro)

The CR-KP3 Wall Plate Control System Keypads are versatile and useful products for both system integrators and smart home users alike. These keypads can send commands to any Ethernet controlled device in your system. With 6 direct macro buttons (plus...
CR-TG1

CR-TG1 Surface Mount Keypad Control System

The CR-TG1 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to any compatible control system. The keypad�...
PU-232

PU-232 RS-232 Control Over CAT5/6 Extender Set

​The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 meters. The RS-232 extender also provides full duplex transmission and hardware h...
PU-IR01-KIT

PU-IR01-KIT Infra red over CAT5/6 Extender Set

​The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three...