The IP-7050RX-TG is part of a 4K UHD Multi-Function Extension system that allows
you to extend HDMI or VGA signals along with KVM using the TCP/IP
protocol over regular Cat.5e/6/7 network cable. This extender supports the
transmission of Ultra High-Definition signals (up to 4K@30Hz YUV 4:4:4 or
4K@60Hz YUV 4:2:0) with audio and USB up to 100m on a single cable. The
transmission distance can be further extended (up to 100m per segment)
by using gigabit network switches, allowing the user to cascade the system
without signal loss or introducing delay.
When the extension system's units are in multicast mode, a single
transmitter’s AV signal can be sent to a large number of receivers within the
same local network without the additional receivers causing the bandwidth
requirements to increase. Additionally, that same multicast signal can be
used to create large multi-display video walls with amazing simplicity. When
combined with the optional IP Master Controller the functionality of the
system expands exponentially. Its centralized web-based interface greatly
simplifies control and management of large distributed video matrix or
video wall systems adding to their flexibility in large home or commercial
installations.
This system also features bi-directional IR and RS-232 pass-through, analog
line level in/out, and a microphone input (on the receiver), providing the user
with a variety of audio options. The USB functionality allows the system to
act like a remote USB hub which, when combined with the VGA input/output
feature, provides a flexible remote KVM platform. Configuration information is
provided via On Screen Display (OSD) and control is by WebGUI, IP Master
Controller, Telnet, Trigger Buttons, and front panel controls.
Manual