PU-305BD-TX Bi-Directional Digital Audio over Single CAT Transmitter

PU-305BD-TX - 45 degree
PU-305BD-TX - 45 degree
PU-305BD-TX - Back
PU-305BD-TX - Schematic
PU-305BD-TX - Front
​The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate.This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided.
The PU-305BD-TX is designed to work with the PU-305BD-RX receiver or the PU-305BDA-RX analogue receiver.

The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system. 
  • Supports Optical SDPIF Input & Output, plus RS-232
  • Supports up to 24bit 192kHz audio signals
  • Supports 192kHz audio up to 100m and 96kHz or lower audio up to 300m
  • Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus signals
  • Supports PoE (Power over Ethernet) via a single PSU which can be connected at either end of the extender set
Inputs 1x Toslink [1x Optical Toslink DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x 9pin Dsub [1x RS-232 Data]
Outputs 1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x RJ45 [1x Digital Audio Propriety Data]
PSU: 12V/1.25A,Bi-directional POE
Dimensions 75mm [W] x 80mm [D] x 25mm [H]
Net Weight 160g
Gross Weight 440g