Welcome to CYP’s specialist USB-C product family.

Here you can find all of CYP Europe’s USB-C based AV and Data products, all in one simply space!

AV over IP

IP-7000C-TX

AV over IP (1G) USB-C & HDMI Transmitter (4K; PoE; HDCP2.2)

Video, audio and control transmission over TCP/IP in Unicast (point-to point) or Multicast (single-to-many) modes
Support with 0°, 180°, 270° increments rotation
Supports resolutions up to 4K2K@30Hz (RGB 4:4:4) or 4K2K@60Hz (YUV 4:2:0)
Supports USB keyboard, mouse and storage extension and IR ,RS-232 bypass

Matrix

OR-32USBC-4K22

3 x 2 USBC and HDMI matrix with USB Ethernet Hub

2 x HDMI and 1 USB-C 4K60Hz 4:4:4 inputs with 2 x HDMI outputs
USB-C port supports USB 3.0 speed, device powering 20V/3A (60 watts)
Supports 4K HDR formats by HDR10, HLG and Dolby Vision
Supports auto-switch functionality with a “last memory” feature for both input ports and USB ports
Supports basic signal event automation (via RS-232, IP or CEC)

OR-32SDMI

3×2 Full 4K Matrix with USB-C, HDMI & SDM module inputs and HDMI outputs with USB Ethernet Hub

3 x 2 HDMI output matrix with USB-C, HDMI and SDM module slot inputs
One input module card slot for CYP SDM series module cards. Look for SDM- product codes
Supports USB 3.0 with one USB-B port, one USB-C port for connecting to a host PC, and two USB-A ports for peripheral devices and storage extension.
Supports gigabit Ethernet
Supports pass-through of 8 channel LPCM, bitstream & HD bitstream audio formats.
Supports 4K HDR formats by HDR10, HLG and Dolby Vision
Supports basic signal event automation (via RS-232, IP or CEC)

EL-8400VA

6 x 2 Presentation Seamless Matrix with USB & Audio/Mic I/O plus a built-in audio amplifier

Supports standard PoH (PSE) from both HDBaseT input and output to the connected HDBaseT (PD) transmitter and receiver (compatible transmitter/ receiver only)
HDBaseT output transmits video and audio over a single Cat.5e cable of 1080p up to 90m/295ft for input and 70m/230ft for output,Cat.6a cable 100m/328ft at 4K@30
Supports HDBaseT feature set: HD Video & Audio, 100BaseT Ethernet, 48V PoH, and Control(Bidirection IR/RS-232/USB pass through)
Controllable via front panel controls with OSD, RS-232, Telnet, WebGUI, and triggers
USB Type-C port provides up to 60W of power to connected device
High performance and efficient Class-D amplifier (20W per channel)
Microphone input supports optional 48V or 5V phantom power
6 video inputs (1×USB-C, 1×HDBaseT, 3×HDMI, 1×DisplayPort) and 2 video outputs(HDMI & HDBaseT)
15 audio sources(10 audio inputs and 5 mixers) can be routed independently to any of the 5 audio outputs
Audio mixer function allows the mixing of audio from any 4 LPCM 2.0 audio sources, including the microphone inputs with auto-gain functionality
Adjustable gain control for individual audio sources and volume control for any outputs
Multiple USB hosts may be connected at once (up to 4 total, between the unit and compatible Tx/Rx) with a single selected host active at a time
Supports manual input selection or automatic input selection for video and usb, with hot plug detection and “Last Memory” feature
Seamless switching (no loss of sync to display)
Comprehensive EDID and HDCP management
Trigger Control Keypad support for easy, single-button and function activation (Optional)
HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) or 4K@30Hz (4:4:4, 8-bit). 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12- bit) sources will be automatically color space converted to fit within the available bandwidth
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) digital video input (HDMI, USB-C, DP) and output (HDMI)
HDBaseT 2.0 compatible
HDMI 2.0, DisplayPort 1.4 compliant
HDCP 1.x and 2.2 compliant

OR-M42HC-USB

4×2 HDMI/USB-C Matrix Multiviewer with USB Strolling

2 HDMI inputs, 2 USB (Type-C) inputs and 2 HDMI outputs up to 4K@60 4:4:4
Controllable via front panel buttons, Telnet, RS-232, and OSD via USB mouse and keyboard
2 USB Type-C Inputs support USB3.1 Gen1 to Ethernet and DP video
Two USB Type-C ports respectively provide 45W and 30W of power to each connected device
Supports PiP (Picture-in-Picture), PoP, quad mode display options with independent audio source selection or auto audio switch by following USB control function
Seamless switching (no loss of sync to display) when switching sources in both matrix and multi-view modes
Supports easy adjustment of window size, position and settings in the window mode via USB mouse
Supports the ability to store a multi-window arrangement as a preset that can be recalled later
Selected window will have a border to highlight the window that is being operated
DVI 1.0 compatible with the use of an HDMI-DVI adaptor
HDCP 1.x and 2.2 compliant

HDBaseT Extender

PUV-1660TTX

4K 6G HDR Multi-format USB-C, MiniDP, HDMI to HDBaseT output table-top switcher

HDBaseT: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT)
Automatic conversion of 4K signals above HDBaseT bandwidth
Reverse PoH (Power over HDBaseT), powered from any of the PUV-1600 ranges RX
Supports basic signal event automation (via RS-232 or CEC)

PUV-1250PL-TX

Multi format 4-way switcher (HDMI; USB-C; DP and VGA) to HDBaseT output (TX)

HDBaseT output supports resolutions up to 4K@60Hz
Integrated auto-switching across all video inputs
Automatic conversion of 4K signals above HDBaseT bandwidth
USB Type-C port provides power (up to 60W) or charge to any compatible device
EDID management and simple signal event automation

PUV-2608TX

HDBaseT2 Transmitter & Multi-Format Switch in the Reverse Power PUV-2600 Series

Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input (auto down scale
2 x HDMI; 1 x DP and 1 x USB-C input to HDBaseT 2 output (TX)
Supports basic signal event automation (via RS-232 or CEC)
USB Type-C port provides power (up to 60W) or charge to any compatible device
Supports optionally being powered via PoH from a compatible PUV-2600 range HDBaseT receiver

PUV-C3050TX-UA

HDBaseT3 Full 4K USB-C Transmitter with USB, PoH, Audio Pathway & HDMI bypass

USB-C (USB 3.0) video compatible
HDMI 2.0 and DVI 1.0 compatible
HDCP 2.2 and HDCP 1.x compliant
HDBaseT 3.0 compliant (Backwards compatible with HDBaseT 2.0/1.0)
1 x USB-C input; 1 x HDBaseT3 and HDMI output
Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video output over both HDMI and HDBaseT
Supports Deep Color input and output up to 12-bit
Supports CEC bypass
HDBaseT extends video, audio and data over a single Cat.6A/7 cable and can reach distances up to 70m/230ft
HDBaseT feature support: HD Video and Audio, PoH (PSE), Bi-directional audio (analogue), and Control (bi-directional USB/IR/RS-232 pass-through)
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
2 USB 2.0 Type-A device ports and 1 USB-C host port
Selectable USB-C audio extraction/analog audio bypass functionality when paired with a compatible receiver Note: USB-C audio extraction is only available with LPCM 2.0 sources.
HDMI output functions as a local monitor
Can supply PoH to a connected compatible receiver

Capture

SY-XTREAM-C

UHD+ HDMI to USB-C Capture with HDMI Bypass

HDMI input and output supports up to 4K@60Hz with HDR bypass
Capturing over USB 3.0 (USB-C) allows uncompressed video and audio data capture up to 4K30Hz
Additional Microphone and Line inputs adds audio flexibility
Support for the Free OBS streaming software which is available for Windows PC, macOS and Linux

SDM-XT-C

4K HDMI to USB-C Capture & Recorder Module

Supports PC video capturing for live streaming on Facebook, YouTube or Twitch channels via OBS
Supports video capturing for communication software
A useful capture tool for meeting and classroom application
For use with any of CYP’s output based SDM core Products

Presentation Switch

EL-8500V

Advanced 4K Presentation Switch with HDMI, HDBaseT, USB Type C and VGA inputs, HDMI & HDBaseT outputs and a built-in audio amplifier

Supports switching and scaling of all AV inputs for display over the mirrored HDMI and HDBaseT outputs
Audio DSP mixer function allows the mixing of audio with the microphone input
Built in 2 x 20 watts audio amplifier and balanced audio output
All HDBaseT I/O can provide PoH power to relevant TX/RX’s
Controllable via front panel controls with OSD, RS-232, Telnet, Web GUI, and triggers

EL-8300VA

Advanced Multi-format 4K Presentation Switch with Audio/Mic I/O & a built-in audio amplifier

8×2 Presentation switcher with HDMI, DisplayPort, VGA and USB-C inputs
HDMI 2.0, DVI 1.0 and HDCP 2.2 compliant
HDBaseT and HDMI mirrored outputs with scaling functionality
Supports up to 4K UHD (18Gbps, 4K@50/60Hz 4:4:4, 8-bit) video input and output (HDMI)
HDBaseT output transmits video and audio over a single Cat.5e/6/7 cable up to 100m/328ft at 1080p and 70m/230ft at 4K; Auto conversion of 6G signals for HDBaseT output compatibility
Audio DSP function allows the mixing of audio from different audio input types plus microphone input balancing
Built in 2 x 20 watts audio amplifier
Trigger Control Keypad support for easy single-button control, function activation (Optional)
Control is via OSD, RS-232, Telnet, Web GUI and triggers
Comprehensive EDID and HDCP management
Supports standard PoH from the unit to connected HDBaseT Receivers (compatible receivers only)
USB Type-C port provides up to 60W of power to connected devices

AVX Extenders

AVX-105C-KIT

UHD+ HDMI over Copper Extender with PoE

Small form factor USB-C to HDMI extender kit
Extension up to 100m from Cat6A/7 cable
Full range of formats including 4K60 RGB/4:4:4, HDR10, 3D and broadcast-friendly 4K60 10-bit 4:2:2
Supports pass-through of 10/12-bit HDR sources
Kit support TX to RX powering (PoE)

AVX-105F-KIT

UHD+ HDMI AV over Fiber Extender

Small form factor USB-C to HDMI extender kit
Full range of formats including 4K60 RGB/4:4:4, HDR10, 3D and broadcast-friendly 4K60 10-bit 4:2:2
Extension up to 30km (maximum distance depends on the SFP+ module and type of fiber used)
Supports pass-through of 10/12-bit HDR sources
Ultra-light compression, lossless for most content

Data Extenders

PU-USB3-KIT

USB 3.2 Data Extender Kit

Support USB 3.2 Gen1 with 1 USB-C host port and 1 USB-A device port
Support Point-to-Point transmission via CAT cabling
Transmission up to 100 meters (328 feet)
The transmitter can be powered by a connected host such as a computer or laptop
The host can control multiple USB devices on transmitter side and receiver side
Firmware update with hotkey from the transmitter, enabling remote firmware updates to the receiver
Backward compatible with USB 2.0
Receiver supports 4 USB 3.2 Gen1 device ports

Switcher

EL-M31TT-4K22

Full 4K Multi-format USB-C, MiniDP, HDMI to HDMI output table-top switcher

Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input & output
1 HDMI, 1 Mini-DisplayPort, 1 USB Type-C video input, and a 3.5mm minijack analogue audio input
HDCP 1.x and 2.2 compatible
DisplayPort 1.4, USB-C, and DVI 1.0 compliant
HDMI output transmits video, audio and data over a single HDMI cable and can reach distances up to 5m at 4K when using standard copper HDMI
Supports 10-bit and 12-bit HDR (High Dynamic Range) input & output
Designed to be able to use with longer fiber HDMI cabling
Analogue audio may be embedded to any source
Individual input based EDID management with internal or external EDID options
Automatic input selection with hot plug detection enabling hands-free operation
Simple CEC based automation control functions
Front panel LEDs indicate input selection, power and link status
Controllable via front panel button, Web GUI, or Telnet

EL-31C-4K22

Full 4K Multi-format Switcher

HDMI 2.0, DisplayPort 1.4, and DVI 1.0 compliant
HDCP 1.x and 2.2 compliant
HDMI, 1 Mini DisplayPort, and 1 USB Type-C input
Supports up to 4K UHD (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input and output
Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output
Supports pass-through of many audio formats including 8 channel LPCM, Bitstream, and HD Bitstream
Supports auto-switch functionality with a “last memory” feature
EDID bypass with an optimized algorithm to ensure optimal resolution and feature support
Easy to read LEDs to indicate input selection and operational mode
Powered via the Mini-USB port (1.2 Amps required)
Small and portable switch box design

USB-C Product Family