Showing 1–16 of 18 results
-
The AU-D18 analogue stereo Lip Sync Corrector is a small device for correcting audio lip sync issues. This solution features a manually adjustable timing selector dial which can be adjusted so that the users may fine tune the timing of...
-
The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the We bGUI or by telnet, eight of which can also be activated...
-
The CR-KP1 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy...
-
The CR-KP2 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy...
-
The CR-KP3 Wall Plate Control System Keypads are versatile and useful products for both system integrators and smart home users alike. These keypads can send commands to any Ethernet controlled device in your system. With 6 direct macro buttons (plus...
-
The CR-KP4 is a versatile and useful product for both system integrators and smart home users alike. This 8-button keypad can send commands to any Ethernet controlled or relay controllable device in your system. The buttons are suitable for all...
-
Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...
-
The CR-TG1 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to any compatible...
-
The CR-TG2 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to the compatible...
-
The CR-UDC1 is a powerful and flexible solution for controlling a wide range of controllable equipment within same local network. With this unit connected to the local network, natively supported devices can be automatically detected, monitored, and controlled via a...
-
The IP-CS7 is a powerful and flexible installation solution for controlling the CYP range of IP-6000’s and IP-7000’s. It is capable of simultaneously managing multiple IP extenders across the same network. The unit only requires installation within your network to...
-
The IP-TG01 is a dedicated in-table single Trigger Button that can be used in both CYP’s Control range (CR-) and our 1G IP range (IP-). The trigger can be used to alter a receiving transmitter source channel in CYP’s 1G...
-
The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 metres. The RS-232 extender also provides full duplex transmission and hardware...
-
The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst...
-
The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams...
-
The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable with high quality, uncompressed, multi-application data streams of...
