Showing 1–16 of 18 results

  • The CM-388M is designed to convert digital signals from a HDMI (or DVI + Coaxial) source to Composite Video or S-Video for NTSC or PAL systems with L/R stereo audio. Besides Composite Video and S-Video outputs, this device also provides...

  • The PRO-H2-3GSDI Dual Output Converter accepts non-HDCP protected HDMI content and will convert to dual 3G-SDI outputs simultaneously. This is perfect for extending HDMI signals over long distances (300m for SD signals) to two displays. This device benefits from a...

  • The PRO-H2SDI, HDMI to SDI Converter, allows HDMI signals to be shown on two SDI displays while ensuring high bit rates of 12 Gbit/s to give you high resolution signal without any loss. For professionals this means that it is...

  • The PRO-SDI2H, SDI to HDMI Converter, allows SD, HD, 3G and 12G-SDI signals to be shown on HDMI display. This means that it is now easier for professionals to distribute and extend their SDI signal while giving the ability to...

  • The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you...

  • Whether a conventional point-to-point system or a fully fledged multi-zone environment, organisation of the numerous components is essential when creating the perfect installation. The equipment rack can typically become a very complex place, especially when employing multiple point-to-point extenders, repeaters...

  • The RE-101-4K22 is designed to enhance and stabilize high-bandwidth HDMI signals, allowing the user to extend a UHD 4K, HDMI 2.2 signal an additional 5m whilst also providing the function of customized EDIDs. The built in EDID management support allows...

  • The RE-EDID is designed to allow the adjustment and manipulation of HDMI/DVI EDID information that is provided to a source device by a connected display so that it may output the correct video/audio signal. Aiming to simplify the technical complications...

  • The RE-EDID-4K22 is designed to manage and manipulate the HDMI/DVI EDID information provided to a HDMI source device by a connected display. EDID contains critical information about the capabilities of the connected display, including audio and video format support, HDMI...

  • The RE-HDEQ is a mini HDMI equaliser enabling the user to extend their HDMI cable lengths up to 15m either side of the device. Resolution support up to 1080P 24fps and 3D compatibility makes this product a simple, yet very...

  • The SDM-SDI12G-RX is a 12G SDI receiver module card from CYP’s SDM range. It is able to convert 12G, 6G, 3G, HD or SD SDI signals into the core module product, like medical equipment, SDI cameras and more to integrate...

  • ​The SDM-SDI12G-TX is a 12G SDI transmitter module card from CYP’s SDM range. It is able to convert 12G, 6G, 3G, HD or SD SDI signals from the core module products, like the OR-PIP42SDMO. To be integrated with SDI devices...

  • The SY-PT385A is a PC to Video scan converter which is designed to convert a variety of PC analogue video signals from VGA to WUXGA. This device also converts between interlaced NTSC or PAL video and features a frame rate...

  • This compact 4K UHD HDMI/VGA to HDMI Switching Scaler accepts a wide range of resolutions from 480i up to 1080p/WUXGA over the VGA input and up to 4K@60Hz (4:4:4) on the HDMI input. With the use of the 3.5mm audio...

  • The XA-2 is an advanced yet compact and convenient pattern generator for testing and troubleshooting HDMI devices. There are 6 resolution settings covering 4K Ultra HD and Full HD resolutions, 4 test patterns, HDCP (1.4, 2.2 and non-HDCP), and 3 audio settings...

  • Testing the integrity of an HDMI cable is essential for any professional AV Installer. As commercial and residential systems are upgraded the demands on HDMI cables to deliver the best possible image are becoming greater and can often be overlooked,...