AU-11SA-4K22 – Full 4K HDMI Audio De-embedder (up to 7.1) with built-in Repeater

The AU-11SA-4K22 advanced digital audio decoder is designed to de-embed 2-channel or multi-channel audio from the connected HDMI input and breakout this audio to provide 7.1 analogue audio connections, plus a 5.1 optical audio output and a HDMI bypass output. This device supports bypass of high resolution digital audio formats including LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio, and supports audio sampling rates up to 192kHz.

In addition, the AU-11SA-4K22 supports 4K video resolutions, HDMI 2.0, and HDCP 2.2 ensuring stunning results and maximum compatibility for any AV system.

  • HDMI 2.0, HDCP 2.2 and DVI compliant
  • HDMI audio decoder with built in repeater
  • Supports HDTV resolutions up to 4Kx2K (3840x2160@24/25/30/ 50/60 YUV_444 & 4096x2160@24/25/30/50/60 YUV_444)
  • The optical output supported audio: LPCM, Dolby Digital and DTS up to 5.1
  • HDMI Bypass output supported audio: Dolby True HD, Dolby Digital Plus, and DTS-HD Master Audio
  • Analogue stereo audio outputs support LPCM 2 channel, 5.1 and 7.1
  •  Audio sampling rate up to 192 kHz
  • HDMI supports high-bit-rate (HBR) audio
Inputs  1x HDMI [1x HDMI 2.0 Uncompressed AV and Data]
Outputs  1x HDMI [1x HDMI 2.0 Uncompressed AV and Data]
1x Toslink [1x Optical Dolby Digital / DTS / 2 Channel LPCM]
1x RCA [1x Front Left Mono]
1x RCA [1x Front Right Mono]
1x RCA [1x Front Centre Mono]
1x RCA [1x Low Frequency Effect Mono]
1x RCA [1x Right Rear Mono]
1x RCA [1x Rear Left Mono]
1x RCA [1x Rear Right Centre Mono]
1x RCA [1x Rear Left Centre Mono]
PSU  5V/2.6A
Dimensions  118mm [W] x 231mm [D] x 25mm [H] 
Net Weight  0.62kg
Gross Weight  0.818kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2606RX – Standard HDBaseT2 Receiver with USB for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...

AU-A300-HBT HDBaseT™ 2-Channel Digital AV Receiver (Repeatable) {End of Life}

The AU-A300-HBT is a compact 2 channel digital receiver that is perfect for providing high quality audio distribution in remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP...

SY-300H-4K22 – Full 4K HDMI to HDMI Scaler with Audio Embedding & De-Embedding

This SY-300H-4K22 accepts and outputs a wide range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio embedding and de-embedding of digital (HDMI or optical) or analogue audio. Integrated EDID and HDCP management allow for control over the connected...

PUV-1H4HPL-AVLC – HDBaseT1 LITE AVLC series Splitter with Audio output & HDMI bypass

The PUV-1H4H-AVLC is a single HDMI Input to 4 x HDBaseT™ Output Distribution Amplifier (Splitter). An advanced solution for splitting and distributing a single HDMI input (up to 4K@60Hz, HDMI 2.0 & HDCP 2.2) to 4 HDBaseT outputs as well...