Overview

AU-11SA – HDMI Audio De-embedder (7.1) with built-in Repeater

The AU-11SA is an advanced solution for HDMI to HDMI repeating with Audio de-embedding. Its compatible with v1.3 HDMI specifications, a cutting edge technology which defines the transfer of deep colour (12 bit) video with a high bandwidth of up to 225Mhz. Connect to source and display (HDMI), select the required audio format & output your audio format to your amplifier. This device has advanced firmware allowing audio to be de-embedded without the need to connect the HDMI display (no sink-end required).

  • HDMI audio de-embedder with built in repeater
  • Compliant with v1.3 HDMI, HDCP 1.1 and DVI 1.1 standards
  • Supports un-compressed digital LPCM 7.1, 5.1 or 2 channels and compressed digital Bitstream (Dolby TrueHD, Dolby Digital Plus, and DTS-HD Master Audio) through HDMI input and output ports
  • Output resolution follows input resolution. Video pass though, no scaling
  • HDMI signal amplification and equalisation supporting HDMI cable distance of 10m either side of the device at full 1080p.
  • Supports LPCM 7.1, 5.1 or 2 channel output through multichannel analogue output ports
  • Supports digital Dolby 5.1/2 and LPCM 2 channels output through optical output
  • Supports CEC bypass
  • Supports 3D signals
  • Supports xvYCC
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x LowFrequencyEffect(LFE) & Front Centre(FC)]
1x 3.5mm Stereo mini-jack [1x RearLeft(RL) & RearRight(RR)]
1x 3.5mm Stereo mini-jack [1x RearLeftCentre(RLC) & RearRightCentre(RRC)]
1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM]
PSU: 5V/2.6A
Dimensions  102mm [W] x 146mm [D] x 25mm [H] 
Net Weight  0.50kg
Gross Weight  0.78kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2606RX – Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch in the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Transmitter & Multi Format Switch, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

AU-A300-HBT HDBaseT™ 2-Channel Digital AV Receiver (Repeatable) (End of Life)

The AU-A300-HBT is a compact 2 channel digital receiver that is perfect for providing high quality audio distribution in remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP...

SY-300H-4K22 – HDMI to HDMI Scaler with Audio Embedding & De-Embedding, 4KUHD Support, HDMI2.0, HDCP2.2

This SY-300H-4K22 accepts and outputs a wide range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio embedding and de-embedding of digital (HDMI or optical) or analogue audio. Integrated EDID and HDCP management allow for control over the connected...