CR-CS2 IP Controller
CR-CS2 - IP to Relay, IR & RS232 Controller
CR-CS2 - IP to Relay, IR & RS232 Controller
CR-CS2 - IP to Relay, IR & RS232 Controller
CR-CS2 - IP to Relay, IR & RS232 Controller

Overview

CR-CS2 – IP to Relay, IR & RS232 Controller

The CR-CS2 IP Controller is a simple Control System for a wide variety of connected devices. It stores 16 user-defined macro events that users can activate through the Web GUI or Telnet. External trigger connections can also activate eight of these macros.. User defined macros can send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or RS-232/422/485 (x1) allowing for the control of a wide array of devices at the push of a button.

An integrated IR code learning function is also available, allowing the user to store and re-transmit the IR codes sent by nearly any standard IR remote. Comprehensive user control interfaces are available including Web GUI, telnet and console (RS-232 in). The CR-CS2 IP Controller supports Power over Ethernet (PoE), allowing you to power it directly from a standard PoE network switch without an external power adapter for simple installation..

  • 16 user defined macro events stored within the device 
  • 8 trigger inputs linked directly to 8 user macros allowing for instant control activation
  • 4 relay trigger outputs to control devices such as projector screens, lighting, blinds etc.
  • 4 IR outputs to control devices such as sources and displays 
  • Integrated IR code learning feature
  • Multiple control interfaces including Web GUI, telnet and RS-232
  • Simple configuration of macros, triggers and relay settings via the Web GUI
  • PoE (Power over Ethernet) support - no PSU required
Inputs  1x RJ45 [1x (PoE) IP Control]
1x USB Type A [1x Service Port Propriety Data]
1x Phoenix (5 pin) [1x RS-232/422/485 Com Port]
1x Phoenix (10 pin) [1x Trigger In (8)]
1x 3.5mm Stereo mini-jack [1x IR capture -  Infra Red Receiver]
Outputs  4x Phoenix (2 pin) [4x Contact Closure Relay Outputs]
4x 3.5mm Stereo mini-jack [4x Infra Red Emitter]
POE PSU PoE
PSU 5V/2.6A
Dimensions  128mm [W] x 25mm [H] x 108mm [D]
Net Weight  400g
Gross Weight  940g
Product Stock Category Core Product

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-IPS1 – IP to Serial Controller with a Single I/O Port

​The CR-IPS1 IP to Serial Controller is for users to control a single Serial device of any variety. It supports one RS-232/422/485 port. Users can connect device and control it via a 3 (or 5)-pin adapter cable to send RS-232/422/485...

CR-IPS4 – IP to Serial Controller with 4 x I/O Ports

The CR-IPS4 IP to Serial Controller is a Control System Centre for users to control a variety of serial devices. This four way version supports RS-232 at each I/O port and 1 port for the additional use of RS-422 or...

CR-CS4 – Hardware System Control I/O Centre

The CR-CS4 Hardware System Control I/O Centre gives integrators complete control over a wide range of connected devices. Use the 16 external trigger connections with the traditional twin-wire short method or our specially designed Trigger Buttons (one included, with additional...

CR-UDC1 – Universal Device Controller

The CR-UDC1 Universal Device Controller is a powerful and flexible solution for controlling a wide range of controllable equipment within the same local network. When you connect this unit to the local network, it automatically detects, monitors, and controls natively...