Overview

CR-KP2 – 9 Button Keypad Controller

The CR-KP2 is a wall-mount keypad control system and is ideally suited for any AV install environment such as conference/meeting rooms, classrooms, and home cinemas allowing commands for multiple devices such as the EL-5500 to be programmed into one easy to use device. The CR-KP2 supports PoE (Power over Ethernet) or a DC power supply and allows full control of any devices that are on the same local network and support IP Telnet control, additionally the CR-KP2 also incorporates a contact-closure connection allowing control of third party devices such as a powered projector screens. The CR-KP2 includes a scheduling function allowing macros to be implemented at a pre-selected time and date, for example turning all the equipment off at the end of the day.

All the features of the CR-KP2 can be programmed using the Web Gui which can be accessed by simply searching the IP address in your internet browser.

We have also introduced our own piece of software the CYP Discovery Protocol Service which will locate any CYP product on a network and display there product code and IP address. This piece of software can be found on the downloads tab of this page along with a application guide.

  • Adjustable brightness and colour settings for the keypad buttons
  • Each keypad button can be assigned one command or macro
  • Up to 16 commands can be stored in each macro
  • A further 15 macros can be stored within the software application and can be called upon within the commands of the macros assigned to the keypad buttons.
  • Scheduling function allows macro commands to be implemented at a pre-selected time
  • Web GUI for programming
  • 1 x Volt free contact closure relay output
  • Supports PoE (Power over Ethernet)
Inputs  1x RJ45 [1x (supports PoE) LAN Serving]
Outputs  1x Phoenix (2 pin) [1x Contact Closure Relay Outputs]
POE PSU PoE
PSU 5V/2.6A
Dimensions  87mm [W] x 87mm [D] x 31mm [H] 
Net Weight  0.185kg
Gross Weight  0.615kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-KP3 6 Button Keypad Controller (EURO) {End of Life}

The CR-KP3 Wall Plate Control System Keypads are versatile and useful products for both system integrators and smart home users alike. These keypads can send commands to any Ethernet controlled device in your system. With 6 direct macro buttons (plus...

CR-KP4 8-Button Keypad Controller

​The CR-KP4 is a versatile and useful product for both system integrators and smart home users alike. This 8-button keypad can send commands to any Ethernet controlled or relay controllable device in your system. The buttons are suitable for all...

CR-TG2 – Surface Mount 8 Button Keypad Control: Specialised Kit Product

The CR-TG2 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to the compatible...

CR-TG1 – Surface Mount 8 Button Keypad Control System

The CR-TG1 Control Trigger Keypad is designed to be a simple and effective alternative for more complex control systems. This keypad features a set of 8 buttons which directly activate 8 trigger outputs which can be attached to any compatible...