Overview

EL-2600V – HDBaseT2 Multi-Format Matrix Transmitter with USB for the Reverse Power PUV-2600 Series

The EL-2600V presentation switcher is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. The three most common video input interfaces (HDMI, DisplayPort, and VGA w/stereo audio) are included, providing the ultimate in source compatibility and flexibility. The HDMI and DisplayPort inputs support resolution/timing up to a maximum of 4K@60Hz (4:4:4, 8-bit) which is converted, when appropriate and necessary, for transmission over HDBaseT. The selected source (video & audio) can be transmitted over Cat.6/7 cable up to 100 meters (at 4K@60Hz) along with bidirectional Ethernet, RS-232, USB, and IR. Due to the matrixing capability of this unit, an independent source may also be selected for output over the local HDMI output. The EL-2600V also includes a microphone input, with optional 48V/5V phantom power support, feeding directly into a DSP mixer, offering the complete presentation solution.

When paired with the PUV-2600RX (Not Included), up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM configuration or interactive displays (Note: Only 1 USB host may be active at a time). This Transmitter also provides an interface for a remote control keypad, or trigger interface, which can be easily installed within a lectern or table in a conference room or classroom.

The EL-2600V can be powered locally using a standard power supply, or it can be powered by 48V PoH (Power over HDBaseT) provided by a RX in the reverse power PUV-2600’s range (Not Included), allowing for greater flexibility within different installation scenarios. This unit is controllable via front panel controls, Web GUI, Telnet, Triggers, and RS-232.

  • HDMI and DisplayPort with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible
  • HDCP 1.x & 2.2 compliant
  • Selectable HDMI, DisplayPort, and VGA inputs
  • HDMI and DisplayPort support input resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • VGA supports input resolutions up to 1080p/WUXGA (RB)
  • HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • HDBaseT output supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit) with automatic colour space conversion of 4K@60Hz (4:4:4, 8-bit) sources
  • 4×2 matrix switching (HDMI and HDBaseT outputs are independent)
  • Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
  • Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats
  • Balanced analogue stereo audio breakout
  • Microphone input supports optional 48V/5V phantom power
  • Microphone input feeds into a DSP mixer allowing adjustable mix level controls
  • Flexible USB host selection using front panel buttons
  • Multiple USB hosts may be connected at once (up to 3 total, between the TX and a compatible Rx unit) with a single selected host active at a time
  • Supports extended keypad (trigger) control for easy, single button, macro activation (optional equipment required)
  • Supports local power, or power via 48V PoH from Receiver (Not Included) to Transmitter (compatible receivers only)
  • Controllable via front panel buttons, Web GUI, Telnet, Triggers, and RS-232
Inputs  2x HDMI [2x HDMI Uncompressed AV and Data]
1x Display Port [1x Display Port Uncompressed AV]
1x 15pin Dsub [1x VGA RGBHV]
2x 3.5mm Stereo mini-jack [2x Analogue Stereo(L/R)]
1x Phoenix (10 pin) [1x Trigger In (8)]
1x RJ45 [1x LAN Serving]
2x USB Type B [2x Propriety Data]
1x 3.5mm Stereo mini-jack [1x RS-232]
1x Phoenix (3 pin) [1x RS-232]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x 6.35mm Stereo Jack [1x Microphone]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x RJ45 [1x HDBaseT2 HDMI & Propriety Data]
1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
3x USB Type A [3x Propriety Data]
POE PSU PoH
PSU 24V/3.75A
Dimensions  158mm [W] x 231mm [D] x 44mm [H] 
Net Weight  1.20kg
Gross Weight  1.80kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2606RX – Standard HDBaseT2 Receiver with USB for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch with USB for the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Transmitter & Multi Format Switch, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

EL-5500N FHD HDMI / VGA Presentation Switch

​​The EL-5500N (latest hardware version) is an advanced rack mountable HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch input sources to it’s two HDMI outputs, with their associated audio signals to the native resolutions supported...

SY-UHDVGA-4K22 – Full 4K 2×1 HDMI/VGA to HDMI Scaler

This compact 4K UHD HDMI/VGA to HDMI Switching Scaler accepts a wide range of resolutions from 480i up to 1080p/WUXGA over the VGA input and up to 4K@60Hz (4:4:4) on the HDMI input. With the use of the 3.5mm audio...