Overview

IP-7000H-TX – 1G 4K AV over IP HDMI Transmitter with USB & PoE

The IP-7000H-TX is the latest HDMI 1G AV over IP (AVoIP) Transmitter, IP-7000H-TX supports industry standard HDMI, RS232, IR, Analogue audio & USB inputs connectivity, for integration into the CYP 7000 AVoIP series.

​​The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many too many, your possibilities are endless. Using the IP-A750TX & RX you can add even audio only zones. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.

The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.

This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input provide the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA loopback output feature, it allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing perceivable delay.

Control is via Telnet, IR Remote, WebGUI and RS-232 commands with On-screen Display (OSD) feedback messaging.

  • HDCP 2.2, HDMI and DVI Compatible with HDMI input only
  • Supports resolutions up to 4K2K@30Hz (RGB 4:4:4) or 4K2K@60Hz (YUV 4:2:0)
  • Supports pass through of HD Audio formats (LPCM, Dolby® Digital and DTS®)
  • Independent Audio Transmission
  • USB input port for direct computer connection
  • Control via dedicated hardware controller (IP-CS7), OSD, Telnet, WebGui, and RS-232
Inputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x 9pin Dsub [1x RS-232 Data]
1x USB Type A [1x Propriety Data]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs 1x RJ45 [1x AV over IP HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
POE PSU PoE (802.3af minimum)
PSU 5V/2.6A (not supplied Order code: PSU-5V2.6A-L)
Dimensions 231.5mm [W] x 25mm [H] x 108mm [D]
Net Weight 660g
Gross Weight 960g
Product Stock Category Core Product

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

IP-7000C-TX – 1G 4K AV Over IP USB-C & HDMI transmitter with USB & PoE

The IP-7000C-TX is the latest 1G AV over IP (AVoIP) Transmitter, IP-7000C-TX adds a USB-C input to the industry standard HDMI, RS232, IR, Analogue audio & USB inputs connectivity. ​​The IP-7000 AVoIP series allows installers to configure a unique signal...

IP-7000TXWP – 1G 4K AV over IP (AVoIP) HDMI or VGA Wall plate Transmitter with USB & PoE

The IP-7000TXWP is a 2-gang wall plate AVoIP  HDMI and VGA transmitter (TX) , the IP-7000TXWP  HDMI/VGA AVoIP wall plate offers a clean, in-wall solution for the CYP IP-7000 AVoIP series. It sends 4K video (up to 4K2K@30Hz RGB 4:4:4,...