Overview

IP-7000TXWP – AV over IP HDMI or VGA Wall plate Transmitter (4K, HDCP2.2, PoE)

The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to many receivers or many to many, your possibilities are almost endless. Simplicity is at the core of the IP-7000 as both the transmitter and receiver support PoE.

This wall plate Transmitter adds flexibility to the IP-7000 series by allowing a clean and simple wall mountable option.

The video and audio can be transmitted via an IP network for distances up to 100m through a single network switch. The transmission distance can be further extended up to 100m between network switches and supports Gigabit networks.

This system also features bi-directional IR pass-through, analogue line level in/out, and microphone input, providing the user with variety of audio options. The USB function allows the system to act like USB hub which, when combined with the VGA input/output feature, allows the system to be used as a KVM switch. Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay.

Control is via Telnet, IR Remote, Web GUI and RS-232 commands with On-screen Display (OSD) feedback messaging.

  • HDCP 2.2, HDMI and DVI Compatible with HDMI and VGA input
  • Supports video transmission over IP up to 100m
  • Supports resolutions up to 4K2K@30Hz (RGB 4:4:4) or 4K2K@60Hz (YUV 4:2:0)
  • Supports pass through of HD Audio formats (LPCM, Dolby® Digital and DTS®)
  • Independent Audio Transmission 3.5mm Jacks
  • 2 gang UK and Euro Wall plate design
  • Features 1 x USB port
  • Controlled via IP-CS7 hardware controller
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x 15pin Dsub [1x VGA RGBHV]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x USB Type B [1x USB  Propriety Data]
Outputs  1x RJ45 [1x HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
POE PSU PoE
PSU 5V/2.6A
Dimensions  152mm [W] x 81mm [D] x 46mm [H] 
Net Weight  250g 
Gross Weight  450g 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

IP-7000TX – AV over IP HDMI or VGA Transmitter (4K, HDCP2.2, PoE)

The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to...

IP-A750TX – Audio over IP Transmitter for IP-7000 series

The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and...