IP-7050RX-TG - 1G 4K AV over IP HDMI Receiver with Control Button Inputs & USB & PoE {End of Life}
IP-7050RX-TG - 1G 4K AV over IP HDMI Receiver with Control Button Inputs & USB & PoE {End of Life}
IP-7050RX-TG - 1G 4K AV over IP HDMI Receiver with Control Button Inputs & USB & PoE {End of Life}
IP-7050RX-TG - 1G 4K AV over IP HDMI Receiver with Control Button Inputs & USB & PoE {End of Life}

Overview

IP-7050RX-TG – 1G 4K AV over IP HDMI Receiver with Control Button Inputs & USB & PoE {End of Life}

The IP-7050RX-TG is part of a 4K UHD Multi-Function Extension system that allows you to extend HDMI or VGA signals along with KVM using the TCP/IP protocol over regular Cat.5e/6/7 network cable. This extender supports the transmission of Ultra High-Definition signals (up to 4K@30Hz YUV 4:4:4 or 4K@60Hz YUV 4:2:0) with audio and USB up to 100m on a single cable. The transmission distance can be further extended (up to 100m per segment) by using gigabit network switches, allowing the user to cascade the system without signal loss or introducing delay.

When the extension system’s units are in multicast mode, a single transmitter’s AV signal can be sent to a large number of receivers within the same local network without the additional receivers causing the bandwidth requirements to increase. Additionally, that same multicast signal can be used to create large multi-display video walls with amazing simplicity. When combined with the optional IP Master Controller the functionality of the system expands exponentially. Its centralized web-based interface greatly simplifies control and management of large distributed video matrix or video wall systems adding to their flexibility in large home or commercial installations.

This system also features bi-directional IR and RS-232 pass-through, analogUE line level in/out, and a microphone input (on the receiver), providing the user with a variety of audio options. The USB functionality allows the system to act like a remote USB hub which, when combined with the VGA input/output feature, provides a flexible remote KVM platform. Configuration information is provided via On Screen Display (OSD) and control is by Web GUI, IP Master Controller, Telnet, Trigger Buttons, and front panel controls.

  • HDMI 2.0 and DVI 1.0 compliant
  • HDCP 1.4 & 2.2 compliant
  • 1×HDMI output
  • Video, audio and control reception over TCP/IP in Unicast (point-to-point) or Multicast (single-to-many) modes
  • HDMI output resolutions up to 4K@30Hz (RGB, 8-bit)
  • VGA input supports resolutions up to WUXGA (RB)
  • Supports extension of many audio formats including 8 channel LPCM and standard Bitstream
  • Supports independent breakaway A/V and control matrix routing
  • Multi-monitor video wall support with 180° and 270° rotation options
  • The Mic In sends audio directly to the analogue Line Out on the currently routed transmitter
  • May be powered directly by PoE when connected to a Gigabit Ethernet switch that provides PoE (802.3af)
  • Includes 3 LAN ports, allowing multiple receivers to be daisy chained without the need for an external Gigabit Ethernet switch
  • Supports USB keyboard, mouse and storage extension
  • Supports IR and RS-232 bypass
  • Supports the use of 2 external Trigger Buttons to control streaming channel selection (Optional, not included)
  • Supports the use of an external control centre (IP Master Controller) to provide expanded functionality (Contact your authorized dealer for more information)
  • Basic control via front panel buttons and external Trigger Buttons, or can be fully controlled via WebGUI, IP Master Controller, and Telnet
Inputs  1x RJ45 [1x PoE HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Microphone]
1x Phoenix (3 pin) [1x RS-232]
2x RJ45 [2x Control Button ports Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
2x RJ45 [2x Bypass AV over IP outputs HDMI & Propriety Data]
1x Toslink [1x DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
6x USB Type A [6x USB  Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU 5V/4A
Dimensions  231.5mm [W] x 25mm [H] x 108mm [D]
Net Weight  680g 
Gross Weight  1.8kg 
Product Stock Category Special Order

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-515PL-KIT – HDBaseT1 LITE (60m) Transmitter & Receiver Kit with PoC {End of Life}

​​The PU-515PL-KIT allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...

PRO-F32M – 4K UHD Fiber Transceiver/Matrix With IR & RS232 Control {End of Life}

This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical...