Overview

IP-A750TX – Audio over IP Transmitter for IP-7000 series

The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and TOSLINK®) for added flexibility and, with the use of our intuitive IP-CS7 controller, allow the user to easily extend the connection between an audio source and an audio playback device via a 1Gb Local Area Network.

The advantage of Audio over IP is that it can flexibly route the audio and use cost effective CAT cable. This greatly reduces the cost of wiring and improves the user experience.

These Audio-over-IP products fully integrate into CYP’s full 1Gb AV over IP system.

  • Extend analog and digital audio over an IP network with 100m (330ft) of CAT 5/6 cable between TX/RX and network switch
  • Compatible with IP-CS7 Controller to allow creation of video matrix switch using multiple Video-Over-IP Extender products. In order to achieve this, require commands to integrate with IP-CS7 hardware controller
  • Features a analogue stereo, optical digital (Toslink) and microphone input
  • Features physical multi-use volume control knob
  • LED confirmation of power, link and input status 
  • Field updatable firmware
Inputs  1x Toslink [1x Optical 2 Channel LPCM]
1x 3.5mm Stereo mini-jack [1x Analogue  Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Microphone]
1x Phoenix (3 pin) [1x RS-232]
Outputs  1x RJ45 [1x Digital Audio Propriety Data]
POE PSU PoE
PSU 5V/3A
Dimensions  128mm [W] x 108mm [D] x 25mm [H] 
Net Weight  371g 
Gross Weight  1071g 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-305BDA-TX – Bi-Directional Analogue Audio over Single CAT Transmitter

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...

PU-305BD-TX – Bi-Directional Digital Audio over Single CAT Transmitter

The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample...

IP-A750RX – Audio over IP Receiver for IP-7000 series

The IP-A750RX (& TX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line out) and Digital output (S/PDIF and TOSLINK®) for added...

IP-7000TX – AV over IP HDMI or VGA Transmitter (4K, HDCP2.2, PoE)

The IP-7000 series allows installers to configure a unique signal distribution system via a dedicated IT Network Infrastructure. You are in control when deciding how many inputs and end-points you require from the system; whether it be one transmitter to...