Overview

OR-42CD-4K22 – x 2 HDMI Matrix Switch with Audio De-Embedding (Full 6G, 4K & HDR resolution support & HDCP 2.2)

The OR-42CD-4K22 provides the ability to connect up to four 4K HDR HDMI sources to up to two 4K HDR HDMI displays and freely switch between them. This matrix fully support for 4K@60Hz (4:4:4, 8- bit) signals as well as support for 16-bit Deep Colour, HDR (High Dynamic Range), 3D content, HD audio and other features defined by the HDMI 2.0 specification.

A high-quality local analog stereo audio breakout from a selected HDMI output is also available. Each input’s EDID can be independently set to use either an internal (1080p@60Hz) or external (sink-copied) EDID. This unit also provides per-output auto source switching as well as connected display power control using CEC or RS-232 commands. Control of the unit is provided via front panel buttons, RS-232, and IR remote

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • 4 HDMI inputs and 2 HDMI outputs
  • Matrix switching with sequential input selection via front panel controls or discrete input selection via IR remote and RS-232
  • Supports up to 4K UHD+ (18Gbps, 4K@50/60Hz 4:4:4, 8-bit & HDR) video input and output
  • Supports 10-bit and 12-bit HDR (High Dynamic Range) input and output
  • Supports pass-through of many audio formats including 8 channel LPCM, Bitstream, and HD Bitstream
  • High-quality DAC provides local analogue stereo audio breakout from the selected HDMI output (LPCM 2.0 sources only)
  • Independent input based EDID management with internal or external EDID options
  • Basic display power automation via RS-232 and CEC
  • Controllable via front-panel buttons, RS-232, and IR remote
Inputs  4x HDMI [4x HDMI Uncompressed AV and Data]
1x Phoenix (3 pin) [1x Console control RS-232]
1x USB Type B [1x Service port Propriety Data]
Outputs  2x HDMI [2x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Analogue Audio Stereo(L/R)]
1x Phoenix (3 pin) [1x Display control RS-232]
PSU 5V/2.6A
Dimensions  231mm [W] x 108mm [D] x 25mm [H] 
Net Weight  0.62kg
Gross Weight  1.55kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2606RX – Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch in the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Transmitter & Multi Format Switch, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

AU-A300-HBT HDBaseT™ 2-Channel Digital AV Receiver (Repeatable) (End of Life)

The AU-A300-HBT is a compact 2 channel digital receiver that is perfect for providing high quality audio distribution in remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP...

SY-300H-4K22 – HDMI to HDMI Scaler with Audio Embedding & De-Embedding, 4KUHD Support, HDMI2.0, HDCP2.2

This SY-300H-4K22 accepts and outputs a wide range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio embedding and de-embedding of digital (HDMI or optical) or analogue audio. Integrated EDID and HDCP management allow for control over the connected...