Overview

PU-1107RX – Digital HDMI over Single CAT6 Receiver {End of Life}

The PU-1107RX can receive a pure digital HDMI signal over a Single CAT6 cable allowing HD Audio & ‘deep colour’ support. This Receiver unit is designed to be used with the PU-1107TX to extend HDMI to a single screen, and the PU-Q1H8CS Splitter for converting the splitters’ single CAT6 outputs, back to HDMI for connection to your displays.

  • v1.3 HDMI, HDCP 1.1, DVI 1.0 compliant
  • Pure digital v1.3 HDMI over single CAT6 Receiver
  • Resolution supported: HDTV - 480i to 1080p plus 1080p 24fps. 
  • Resolution supported: PC - VGA to WUXGA
  • High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM.
  • Supports CEC bypass
  • Supports xvYCC 
  • Equalises and recovers incoming TMDS data before re-transmitting to ensure optimum signal quality.
  • Supports Deep Colour: 10 and 12 bit
  • Supports 3D signals
Inputs  1x RJ45 [1x HDMI & Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
PSU  5V/1.2A
Dimensions  79mm [W] x 75mm [D] x 30mm [H] 
Net Weight  0.28kg
Gross Weight  0.38kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

AVX-105C-KIT – AVX Full 4K USB-C to HDMI AV over CAT Transmitter/Receiver KIT

The AVX-105C-KIT is a 4K UHD+ USB-C over CAT Transmission kit, that is designed for high-quality AV extension with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K@60Hz (4:4:4)...

PU-1201-KIT – Full 4K HDMI over CAT extender kit with local HDMI bypass and RX input

The PU-1201-KIT is a UHD+ HDMI over Cat Cable extension system which is able to extend high quality 4K HDMI video along with audio up to 60m (197ft) of Cat.6a/7 network cable without signal loss or introducing delay. The transmitter...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...