Overview

PU-232 – RS-232 Control over CAT5/6 Extender Set

The CAT5/6 RS-232 extender is a hardware-based solution providing control of any RS-232 protocol device. This transmitter and receiver set will extend the control of RS-232 for over 250 metres. The RS-232 extender also provides full duplex transmission and hardware handshake signals, with no need for any set up or configuration.

  • Extends any RS-232 compliant device up to 250 metres from the source to display
  • Requires only one CAT5/6 cable
  • Perfect for digital signage applications
  • Baud Rate: 110~921600. Data bit: 8bit
  •  Simple installation and operation
Inputs  (RX) 1x RJ45 [1x RS-232 Propriety Data]
(TX) 1x 9pin Dsub [1x RS-232 Data]
Outputs  (RX) 1x 9pin Dsub [1x RS-232 Data]
(TX) 1x RJ45 [1x RS-232 Propriety Data]
PSU  5V/1.2A
Dimensions  (TX) 50mm [W] x 70mm [D] x 25mm [H]
(RX) 50mm [W] x 70mm [D] x 25mm [H] 
Net Weight  (TX) 0.13kg (RX) 0.13kg
Gross Weight  0.38kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-TG02 – 1 x 2 Trigger Button Splitter (for single button trigger IP-TG01)

Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...

PU-IR01-KIT – Infra Red over CAT5e/6 Extender Set

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst...

PU-USB-AL-KIT – USB 2.0, Audio & LAN over CAT Extender

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams...