Overview

PU-305BD-TX – Bi-Directional Digital Audio over Single CAT Transmitter

The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample rate. This extender set also supports RS-232 signals over the same CAT5e/6 cable. The PU-305BD-TX can be powered at either end using the supplied PSU adaptor for added flexibility. Digital audio signals are supported up to a sample rate of 192Khz, and support for LPCM Stereo and Multichannel digital audio (LPCM, DTS, Dolby Digital, Dolby Digital Plus) is also provided. The PU-305BD-TX is designed to work with the PU-305BD-RX receiver or the PU-305BDA-RX analogue receiver.

The PU-305BD-KIT is perfect for multi-room AV systems where the optical audio from a HDTV or amplifier can be routed back to a rack matrix for further distribution throughout a wider multi-room AV system.

  • Supports Optical SDPIF Input & Output, plus RS-232
  • Supports up to 24bit 192kHz audio signals
  • Supports 192kHz audio up to 100m and 96kHz or lower audio up to 300m
  • Supports LPCM, DTS, Dolby Digital and Dolby Digital Plus signals
  • Supports PoE (Power over Ethernet) via a single PSU which can be connected at either end of the extender set
Inputs  1x Toslink [1x Optical Toslink DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x 9pin Dsub [1x RS-232 Data]
Outputs  1x Toslink [1x Optical DTS / Dolby Digital / 2 Channel LPCM / Dolby Digital Plus]
1x RJ45 [1x Digital Audio Propriety Data]
PSU 12V/1.25A,Bi-directional POE
Dimensions  75mm [W] x 80mm [D] x 25mm [H] 
Net Weight  0.16kg
Gross Weight  0.44kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-305BDA-TX – Bi-Directional Analogue Audio over Single CAT Transmitter

The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...

PU-305BDA-RX – Bi-Directional Analogue Audio over Single CAT Receiver

The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...

IP-A750TX – Audio over IP Transmitter for IP-7000 series

The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and...