The PU-305BDA-TX is an analogue Stereo over CAT5e/6/7 Transmitter which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over Ethernet (PoE) function can power the receiver unit eliminating the need for a second power supply. As the unit has bi-directional capabilities, this device can also receive audio signals back from the connected receiver.
This transmitter is designed to be used with the PU-305BDA-RX Analogue Audio Receiver or the PU-305BD-RX Digital Audio Receiver. When combined with the PU-305BD-RX digital receiver, the analogue audio signal will be converted and outputted as digital audio by the receivers’ built-in digital to analogue converter (DAC).
| Inputs | 2x RCA [1x Analogue Stereo (L/R)] 1x 9pin Dsub [1x RS-232 Data] |
| Outputs | 2x RCA [1x Analogue Stereo (L/R)] 1x RJ45 [1x Bi-directional Audio plus Propriety Data] |
| PSU | 12V/1.25A,Bi-directional POE |
| Dimensions | 100mm [W] x 110mm [D] x 25mm [H] |
| Net Weight | 0.12kg |
| Gross Weight | 0.36kg |
Did you know that this product also works with the following CYP products...
The PU-305BD-TX transmitter is designed to send digital audio signals up to 300m over CAT5e/6 cable infrastructure. This device is Bi-Directional and supports Digital Optical signals allowing transmission up to 300m at 96KHz sample rate, or 100m at 192KHz sample...
The PU-305BDA-RX is an analogue Stereo over CAT5e/6/7 Receiver which can send and receive analogue audio signals over a single run of CAT5e/6 cable up to 300m. It has the added benefit of RS-232 pass-through allowing control of devices and the Power over...
The IP-A750TX (& RX) takes advantage of Audio over IP’s flexibility for all installation environments, ideal for audio-only zones within a larger AV over IP system. These products feature Analogue (Line in and Mic in) and Digital In (S/PDIF and...
