Overview

PU-HBT-EX – 100m HDBaseT™ Repeater

The PU-HBT-EX repeater is designed to extend the signal transmission distances of CYP HDBaseT™ Extender sets and Matrix systems by allowing the user to repeat HDBaseT™ signals a further 100m over CAT5e/6/7 cable. This device features full 5-Play™ functionality, including the highest quality 4K2K uncompressed HD video, uncompressed multi-channel audio, bi-directional control systems (IR & RS-232), Power over Cable (PoC), and Ethernet (for LAN serving & IP Control). This Repeater is designed to be used with the PU-507 and PU-1109 point-to-point Extender Kits, the PU-8H8CTX & PU-8H8CTXIR 8-Way Transmitters, and with any CYP full HDBaseT™ Matrix system (PU-8H8HBT / PU-8H8HBTE / PU-4H4HBT).

When combined with CYP HDBaseT™ distribution solutions, this Repeater gives any installer the ability to send Audio, Video, PoC, and Control signals reliably up to 200m. The PU-HBT-EX can also be cascaded twice to achieve a maximum of 300m transmission distance.

  • Supports uncompressed video/audio up to 10.2Gbps
  • Supports resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
  • HDMI, HDCP and DVI compliant
  • High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio plus LPCM (up to 192kHz)
  • Supports RS-232, 2-Way IR, and HDMI CEC control pass through
  • Full 5-Play™ Convergence - HDMI, LAN, PoC, & Control (RS-232 & IR)
  • Supports 3D signals
  • Supports LAN serving to all connected zones
Inputs  1x RJ45 [1x HDMI & Propriety Data]
Outputs  1x RJ45 [1x HDMI & Propriety Data]
PSU  24V/1.25A
Dimensions  98mm [W] x 152mm [D] x 25mm [H] 
Net Weight  0.34kg
Gross Weight  0.74kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-HBT1-RX – HDBaseT1 Receiver SDM Module…Coming Summer 2024

​The SDM-HBT1-RX is an HDBaseT1, SDM Module Card that is able to receive signals from compatible HDBaseT transmitters via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT output connection with...

SDM-HBT1-TX – HDBaseT1 Transmitter SDM module…Coming Summer 2024

​​The SDM-HBT1-TX is an HDBaseT1, SDM Module Card that is able to transmit signals to a compatible HDBaseT receivers via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT input connection...

PU-607BDWP-TX – HDMI over Single CAT5e/6/7 HDBaseT™ – Bi-directional PoC Wall Plate Transmitter (full 5-Play™ & Single LAN up to 100m) {End of Life}

​​​​​The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI...

PUV-POH – PoE/PoH Power Injector

The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you...