Overview

PU-IR01-KIT – Infra Red over CAT5e/6 Extender Set

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst the remaining three sources can be controlled locally to the extender, which can be located up to 250m away via CAT5/6 cable. This system allows for the sources to be controlled by their own original remote controls, from extended distances. A 5-eye emitter accessory can be supplied for additional control of extra source equipment.

  • Supports five outputs (two from the repeater, three from the extender)
  • Control source equipment from a distance of up to 250 metres away, via CAT5/6 cable
  • Transmits infrared signals only
  • Allows the use of existing remote controls
  • IR Receiver's frequency is at 20~60 kHz
Inputs  (PU-IR12) 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
(PU-IR03) 1x RJ45 [1x IR Propriety Data]
Outputs  (PU-IR12) 2x 3.5mm Stereo mini-jack [2x Infra Red Emitter]
1x RJ45 [1x IR Propriety Data]
(PU-IR03) 3x 3.5mm Stereo mini-jack [3x Infra Red Emitter]
PSU  5V/1.2A
Dimensions  (PU-IR03) 50mm [W] x 65mm [D] x 25mm [H]
(PU-IR12) 50mm [W] x 65mm [D] x 25mm [H] 
Net Weight  (PU-IR03) 0.14kg (PU-IR12) 0.28kg
Gross Weight  0.58kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-TG02 – 1 x 2 Trigger Button Splitter (for single button trigger IP-TG01)

Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...

CR-IRL – USB Dongle IR Remote Control Learner

​The CR-IRL Infrared Learner is a versatile tool for all your control system design needs. This compact yet functional unit can convert your analogue IR commands into digital data and store it for many uses. With the simple software tool...

PU-USB2-KIT – USB 2.0 Over CAT Transmitter Receiver Kit

The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable up to 50 metres with high quality, uncompressed,...

PU-USB-AL-KIT – USB 2.0, Audio & LAN Over CAT Transmitter Receiver Kit

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams...