Overview

PU-USB-AL-KIT – USB 2.0, Audio & LAN over CAT Extender

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams and Skype for Business.

The solution is comprised of two PU-USB-AL units connected via CAT6/7 which may be extended up to 100m (330 feet). Bi-directional PoC (power over cable) is supported enabling either side of the system to provide power, perfect for managing power requirements within an installation.

Typically a system can support one USB host and up to 6 USB devices (3 on the transmitter side, and 3 on the receiver side). The USB host is automatically located by the device, alternatively, this can be selected via the front panel buttons.

  • USB 2.0, Analogue Audio & LAN extension up to 100m over CAT6/7
  • Supports auto-configurable USB port, capable of acting as either host or device
  • All USB device ports are active simultaneously, allowing for the connection of up to 6 USB 2.0 device when used in a point-to-point system
Inputs  3x USB Type A [3x USB devices Propriety Data]
1x RJ45 [1x LAN Serving]
1x 3.5mm Stereo mini-jack [1x Analogue Audio Stereo(L/R)]
1x RJ45 [1x CAT data stream I/O Propriety Data]
Outputs  1x USB Type B [1x Host USB device Propriety Data]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]
PSU:  24V/2.7A
Dimensions  128mm [W] x 113mm [D] x 25mm [H] 
Net Weight  0.367kg
Gross Weight  1.217kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-TG02 – 1 x 2 Trigger Button Splitter (for single button trigger IP-TG01)

Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...

XA-IRL – Infrared Learner

PU-IR01-KIT – Infra Red over CAT5e/6 Extender Set

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst...

PU-USB2-KIT – USB 2.0 transmitter/receiver kit

The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable up to 50 metres with high quality, uncompressed,...