Overview

PU-USB2-KIT – USB 2.0 transmitter/receiver kit

The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable with high quality, uncompressed, multi-application data streams of USB.

This features 1 host to 4 devices, all housed in a compact housing.

  • Supports Point-to-Point USB transmission
  • Supports USB2.0, multi-streaming and multiple USB 2.0 device ports
  • 1 host port to 4 device ports
  • Each port can be used to connect a USB device. Multiple USB devices can be serviced simultaneously
  • TX powered by connected host such as computer or laptop.
  • Total 2A for 4 USB ports
  • Low emission and robust noise immunity 
PU-USBTX  
Inputs  1x USB Type B [1x USB Propriety Data]
Outputs  1x RJ45 [1x USB &  Propriety Data]
PSU 5V/3A
Dimensions  103mm [W] x 95mm [D] x 27mm [H] 
Net Weight  200g 
   
PU-USBRX  
Inputs  1x RJ45 [1x USB &  Propriety Data]
Outputs  4x USB Type A [4x USB &  Propriety Data]
PSU  5V/3A
Dimensions  104mm [W] x 95mm [D] x 26mm [H] 
Net Weight  560g 
   
Total Gross Weight  500g

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-TG02 – 1 x 2 Trigger Button Splitter (for single button trigger IP-TG01)

Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...

PU-USB-AL-KIT – USB 2.0, Audio & LAN over CAT Extender

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams...

PU-IR01-KIT – Infra Red over CAT5e/6 Extender Set

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst...