Overview

PUV-1082-4K22N – 10 x 10 HDMI HDBaseT™ Matrix with Audio Matricing (4K, HDCP2.2, HDMI2.0, PoH, LAN, OAR, 100m) {End Of Life}

  • 10 HDMI In & 8 HDBaseT + 2 HDMI out – HDBaseT outputs via CAT5e/6/7 cables allows 4K UHD transmission up to 100m, while the independent HDMI outputs support a 10m transmission; compliant with HDCP2.2, HDMI2.0 and 3D content.
  • Vibrant video – Resolution from VGA~WUXGA to 4K2K@60Hz, are supported by both HDBaseT and HDMI, depending on the output display’s EDID settings.
  • Wide Bandwidth – LAN connectivity offers 100BaseT network for smart TVs or game consoles in every zone, and the Power over HDBaseT (PoH) function and Optical Audio Return (OAR) Technology is designed to be used with PUV-1530RX or PUV-1510RX receivers.
  • 10×14 Audio Matrix – This matrix incorporates an audio matrix functionality that can embed and de-embed audio across video and audio matrix; also supports conversion between digital and analogue for integration.
  • Versatile Integration – Audio outputs can be controlled directly through the matrix, including volume, mute, treble, bass and audio lip-sink correction. Audio CAT connection, along with compatible bi-directional audio modules (PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones.
  • Audio Format – High resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio are supported.
  • Testing Pattern – The matrix generates pattern internally to verify video signal of itself and 10 connected sink devices.
  • Multiple Control Access – As we provide control drivers for all major control systems, control is via manual selection buttons, IR, RS-232, Telnet or Web GUI.
  • HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
  • Routes ten HDMI sources to ten displays using eight HDBaseT outputs and two independent HDMI outputs
  • HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR)
  • Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K@24Hz 4:2:2 HDR 
  • Supports resolutions up to 4K@60 (YUV 4:4:4) & HDR on HDMI output ports
  • Supports automatic 4K@60 YUV 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
  • Supports automatic 4K HDR conversion for HDBaseT outputs as required
  • Supports HDMI inputs and HDBaseT / HDMI outputs HEX based CEC messaging
  • Supports HDBaseT output downscaling
  • 4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
  • Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio and DTS X
  • Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, fully independent audio only zones and HDMI audio embedding and de-embedding
  • Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
  • Supports on-board audio over CAT inputs and outputs for transmission up to 150m
  • Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
  • Supports Audio Pre-Gain level adjustment for all digital and analogue audio inputs
  • HDBaseT outputs with Optical Audio Return (OAR) system
  • Audio mixer function
  • Advanced internal and external EDID management with 4 sets of configurable EDID settings
  • Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
  • Bi-directional IR support over HDBaseT 
  • Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
  • Supports OSD for input and output naming plus banner text
  • 2U rack mounted design
Inputs  10x HDMI [10x HDMI  Uncompressed AV and Data]
8x RCA [4x Configurable Analogue Audio Stereo (L/R)]
2x RJ45 [2x bi-directional audio plus Propriety Data]
9x 3.5mm Stereo mini-jack [9x Infra Red Receiver]
1x RJ45 [1x IP Control / LAN Serving]
1x 9pin Dsub [1x RS-232 Data]
2x Toslink [2x Optical 2 Channel LPCM]
2x RCA [2x Coaxial 2 Channel LPCM]
Outputs  8x RJ45 [8x HDBaseT HDMI & Propriety Data]
2x HDMI [2x HDMI Uncompressed AV and Data]
24x RCA [12x Zone and Extended Audio Stereo (L/R)]
11x 3.5mm Stereo mini-jack [11x Infra Red Emitter]
POE PSU PoH
PSU 24V/6.25A
Dimensions  316mm [W] x 428mm [D] x 96mm [H] 
Net Weight  6500g 
Gross Weight  8500g 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...

PRO-F32M – 4K UHD Fiber Transceiver/Matrix With IR & RS232 Control {End of Life}

This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical...

PU-1106TX – HDMI over CAT5e/6 Transmitter with IR Blaster {End of Life}

The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster. The PU-1106TX is specifically designed to be used with the...