Overview

PUV-1350PL-TXWP – HDBaseT1 LITE multi-format Switching Wallplate Transmitter with USB: Specialised Kit Product

The PUV-1350PL-TXWP Wallplate HDBaseT Transmitter is a HDMI/VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This wallplate forms part of the PUV-1350PL-kit which also includes the PUV-1350PLA-RX and the CR-TG2, together they offer a flexible AV and USB extension system reaching up to 35m when sending 4K timings (60m up to 1080p).

Signal management features such as automatic switching based on input signal and hot plug detection enable convenient hands-free operation. An input button on the face ofthe transmitter provides the option of quick, single button press, manual input selections when needed.

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • 3 HDMI inputs & 1 VGA input with 3.5mm mini-jack audio input
  • Supports HDMI input resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • Supports VGA input resolutions up to WUXGA (RB)
  • HDBaseT extension supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic conversion of 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit) sources to 4K@30Hz (4:4:4, 8-bit)
  • Analog stereo audio may be embedded with VGA or DVI/HDMI sources
  • HDBaseT extends video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 35m/115ft at 4K when using Cat.6A/7 (up to 60m @ 1080p 8bit 4:4:4)
  • HDBaseT feature support: HD Video and Audio, control extension (IR, USB 2.0), and PoH
  • Supports CEC bypass
  • Supports pass-through of many audio formats including LPCM (up to 8 channels), Bitstream, and HD Bitstream
  • Supports manual input selection or automatic input selection with hot plug detection
  • Wall plate’s back box is designed for EU or UK three-gang sized enclosures with a UK 3-gang style faceplate
  • The transmitter is powered via PoH from the receiver and the Control Keypad is powered directly by the transmitter
  • The transmitter is controlled by the receiver, or via front panel buttons
Inputs  3x HDMI [3x HDMI Uncompressed AV and Data]
1x 15pin Dsub [1x VGA RGBHV]
1x 3.5mm Stereo mini-jack [1x Analogue  Stereo(L/R)]
1x USB Type B [1x USB data Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs  1x RJ45 [1x HDBaseT  HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x RS-232  Propriety Data]
POE PSU PoH
Dimensions  225mm [W] x 81mm [D] x 46mm [H] 
Net Weight  350g 
Gross Weight  540g 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-HBT1-RX – HDBaseT1 Receiver SDM Module…Coming Summer 2024

​The SDM-HBT1-RX is an HDBaseT1, SDM Module Card that is able to receive signals from compatible HDBaseT transmitters via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT output connection with...

SDM-HBT1-TX – HDBaseT1 Transmitter SDM module…Coming Summer 2024

​​The SDM-HBT1-TX is an HDBaseT1, SDM Module Card that is able to transmit signals to a compatible HDBaseT receivers via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT input connection...

PU-607BDWP-TX – HDMI over Single CAT5e/6/7 HDBaseT™ – Bi-directional PoC Wall Plate Transmitter (full 5-Play™ & Single LAN up to 100m) {End of Life}

​​​​​The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI...

PUV-POH – HDBaseT PoE/PoH Power Injector

The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you...