Overview

PUV-1350PLA-RX – HDBaseT1 LITE Receiver with Amplifier & USB: Specialised Kit Product

The PUV-1350PLA-RX is a powered HDBaseT receiver with USB pathway and built in audio amplifier. The receiver forms part of the PUV-1350PL-Kit which also includes the PUV-1350PL-TXWP and the CR-TG2, together they offer a flexible AV and USB extension system reaching up to 35m when sending 4K timings (60m up to 1080p).

From within the receivers webGUI configurators can control additional functionality such as basic EDID management, HDCP management, Relays and basic signal event automation (which can automatically control external devices). All system functionality is controllable by the receiver via front panel controls, WebGUI, Telnet, and RS-232.

Additionally, the receiver features analogue audio de-embedding to a line output and a 20 watt, 4 Ohm, stereo amplified output.

The PUV-1350PLA-RX is also used with the PUV-1330PL-Kit

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • 1 x HDMI output plus analogue stereo audio output 
  • Built-in 20W per channel stereo amplifier
  • HDBaseT extension supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic conversion of 4K@50/60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit) sources to 4K@30Hz (4:4:4, 8-bit)
  • HDBaseT extends video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 35m/115ft at 4K when using Cat.6A/7 (up to 60m 1080p60 8bit 4:4:4)
  • HDBaseT feature support: HD Video and Audio, control extension (IR, USB 2.0), and PoH
  • Supports CEC bypass
  • Supports pass-through of many audio formats including LPCM (up to 8 channels), Bitstream, and HD Bitstream
  • Basic signal event automation (via RS-232, IR, CEC, and Relay)
  • The receiver is controllable via front panel buttons with OSD, Control Keypad, WebGUI, Telnet, and RS-232
Inputs  1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x RJ45 [1x IP Control]
1x Phoenix (4 pin) [1x RS-232 local control]
1x Phoenix (4 pin) [1x RS-232 HDBaseT pathway]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x USB Type A [1x USB data Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
4x Phoenix (2 pin) [4x Contact Closure Relay Outputs]
2x Phoenix (2 pin) [1x Speaker Level Stereo Output]
PSU 24V/3.75A
Dimensions  231mm [W] x 108mm [D] x 25mm [H] 
Net Weight  680g 
Gross Weight  2000g 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-HBT1-RX – HDBaseT1 Receiver SDM Module…Coming Summer 2024

​The SDM-HBT1-RX is an HDBaseT1, SDM Module Card that is able to receive signals from compatible HDBaseT transmitters via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT output connection with...

SDM-HBT1-TX – HDBaseT1 Transmitter SDM module…Coming Summer 2024

​​The SDM-HBT1-TX is an HDBaseT1, SDM Module Card that is able to transmit signals to a compatible HDBaseT receivers via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT input connection...

PU-607BDWP-TX – HDMI over Single CAT5e/6/7 HDBaseT™ – Bi-directional PoC Wall Plate Transmitter (full 5-Play™ & Single LAN up to 100m) {End of Life}

​​​​​The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI...

PUV-POH – HDBaseT PoE/PoH Power Injector

The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you...