PUV-1620A-RX – HDBaseT1 switching Receiver with built in Amplifier for the Reverse Power PUV-1600 Series

The PUV-1620A-RX HDMI over HDBaseT Receiver with Amplifier is a 2 by 1 switch with standard HDMI and HDBaseT inputs and an HDMI output as well as amplified stereo audio output. This unit’s HDBaseT input can receive uncompressed high-definition 4K UHD (up to 10.2Gbps) video along with Ethernet, RS-232 and IR control over a single cable up to a distance of 100 metres while the HDMI input supports high bandwidth 4K UHD+ sources (up to 18Gbps) with support for 10/12-bit HDR. Pass-through of multiple digital audio formats such as LPCM (up to 8 channels), Bitstream and HD Bitstream is also supported via the HDBaseT and HDMI inputs. Additionally, the integrated 3.5mm mini-jack and class D stereo amplifier outputs allow audio to be extracted from the selected source (LPCM 2.0 sources only) for local sound reinforcement, ideal for small meeting spaces, classrooms or lecture theatres.

Signal management features such as automatic switching based on input signal and hot plug detection enable convenient hands-free operation. There are also four built-in switching relay connections allowing control over direct power devices such as projection screens, curtains, lights, etc. Front panel controls and a comprehensive Web GUI provide access to manual input selection, volume control, as well as additional functionality such as EDID management, HDCP management and control over the four relay ports.

This switching receiver is ideal for use in residential or commercial point to point applications that require long HDBaseT signal transmission distances such as home theatres, conference rooms, huddle rooms, or lecture halls. The integrated PoH (Power over HDBaseT) feature can provide power to compatible transmitters, providing greater flexibility in installations. This unit can be controlled in a wide variety of different ways including front panel buttons, Web GUI, Telnet, and RS-232.

  • HDMI 2.0 and HDBaseT 1.0 compatible
  • HDCP 1.x and 2.2 compliant
  • 1×HDMI and 1×HDBaseT inputs
  • 1×HDMI output
  • HDBaseT input supports resolutions up to 4K@60Hz (4:2:0, 8-bit) or 4K@30Hz (4:4:4, 8-bit).
  • HDMI input and output supports resolutions up to 4K UHD+ (18Gbps,4K@60Hz 4:4:4, 8-bit)
  • Supports Deep Colour input and output up to 12-bit at 1080p60
  • Supports 10-bit and 12-bit HDR (High Dynamic Range) input/output (HDMI bypass only)
  • Supports CEC bypass
  • Comprehensive EDID and HDCP management
  • HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, PoH (PSE) and Control (bi-directional IR/RS-232 pass-through)
  • HDBaseT input receives video, audio and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/328ft at 4K when using Cat.6A/7
  • Supports standard PoH (PSE) from the HDBaseT input to connected HDBaseT (PD) transmitters (compatible transmitters only)
  • Supports pass-through of HD audio formats including LPCM (up to 8 channels), Bitstream, and HD Bitstream
  • Compact amplifier design
  • High performance and efficient 2 channel, class D amplifier with 20 watts of power per channel and volume control
  • Control via front panel buttons, Web GUI, Telnet, and RS-232
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x RS-232]
1x USB Type A [1x Service Port Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]
2x Phoenix (2 pin) [1x Amplifier Output Speaker Level Stereo Output]
1x RJ45 [1x LAN Serving]
1x Phoenix (3 pin) [1x RS-232]
PSU  24V/3.75A
Dimensions  231mm [W] x 108mm [D] x 25mm [H] 
Net Weight  0.70kg 
Gross Weight  1.02kg 

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-HBT1-RX – HDBaseT1 Receiver SDM Module…Coming Summer 2024

​The SDM-HBT1-RX is an HDBaseT1, SDM Module Card that is able to receive signals from compatible HDBaseT transmitters via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT output connection with...

SDM-HBT1-TX – HDBaseT1 Transmitter SDM module…Coming Summer 2024

​​The SDM-HBT1-TX is an HDBaseT1, SDM Module Card that is able to transmit signals to a compatible HDBaseT receivers via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT input connection...

PU-607BDWP-TX – HDMI over Single CAT5e/6/7 HDBaseT™ – Bi-directional PoC Wall Plate Transmitter (full 5-Play™ & Single LAN up to 100m) {End of Life}

​​​​​The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI...

PUV-2606RX – Standard HDBaseT2 Receiver with USB for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...