Overview

PUV-1630TTX – HDBaseT1 switching Tabletop Transmitter for the Reverse Power PUV-1600 Series

The PUV-1630TTX is a brand new AV concept for the Commercial & Corporate channel. Presentation equipment in corporate meeting rooms can be difficult to operate and provide the user with challenges when connecting their source to the installed AV system. Flexible meeting rooms are also becoming more commonplace, which is where the PUV-1630TTX provides the perfect balance between ease of use and portability.

In collaboration with CMD the leading office power and lighting specialists, CYP has developed a dedicated HDBaseT switcher and Transmitter that fits seamlessly into the CMD ‘Contour’ range. Providing the user with a flexible AV solution that removes the boundaries of how a meeting space can be used.

The PUV-1630TTX Transmitter is a 2 x HDMI, 1 x VGA switch which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable. These combined HDMI and control signals can be transmitted up to lengths of 100 metres to a compatible PUV-1600 Series Receiver. When a device is connected to the PUV-1630TTX, CEC control can be applied to ‘power up’ the connected display and select the correct HDMI input channel (programmed via the Web GUI).

This unit also supports automatic input detection between the HDMI and the VGA inputs using hot plug detection, offering the user ‘hands free’ control of the device. Despite the 10.2Gbps bandwidth limitation of HDBaseT this clever transmitter will automatically convert signals of higher bandwidths ensuring any HDMI 4KUHD signal can be passed through the HDBaseT system. The unit also features push button control on the front of the panel. The unit is powered by PoH supplied by a compatible PUV-1600 series receiver.

  • Produced in collaboration with CMD 
  • Supplied complete with the CMD 'Contour' unit, and C Clamp for table-top fixing
  • HDBaseT: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT)
  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 Compliant
  • 2 x HDMI Input
  • 1 x VGA Input with 3.5mm mini-jack analogue audio input
  • Automatic conversion of 4K @ 50/60Hz HDMI sources to 4K@30Hz (4:4:4 8-Bit) for transmission over HDBaseT
  • Supports VGA input resolutions up to WUXGA (RGB)
  • PoH (Power over HDBaseT) Support
  • Auto Switching
  • CEC Control
  • Front panel push button control
  • Front panel LEDs to indicate Input Selection, link status and power
Inputs  2x HDMI [2x HDMI Uncompressed AV and Data]
1x 15pin Dsub [1x VGA RGBHV]
1x 3.5mm Stereo mini-jack [1x Analogue audio Stereo(L/R)]
1x RJ45 [1x LAN Serving]
Outputs  1x RJ45 [1x HDBaseT HDMI & Propriety Data]
PSU  PoH
Dimensions  130mm [W] x 50mm [D] x 45mm [H] 
Net Weight  0.23kg
Gross Weight  0.38kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-HBT1-RX – HDBaseT1 Receiver SDM Module…Coming Summer 2024

​The SDM-HBT1-RX is an HDBaseT1, SDM Module Card that is able to receive signals from compatible HDBaseT transmitters via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT output connection with...

SDM-HBT1-TX – HDBaseT1 Transmitter SDM module…Coming Summer 2024

​​The SDM-HBT1-TX is an HDBaseT1, SDM Module Card that is able to transmit signals to a compatible HDBaseT receivers via Cat6 cabling. It supports resolutions up to 4K@60 4:2:0 or 4K30 4:4:4 and simply has a RJ45 HDBaseT input connection...

PU-607BDWP-TX – HDMI over Single CAT5e/6/7 HDBaseT™ – Bi-directional PoC Wall Plate Transmitter (full 5-Play™ & Single LAN up to 100m) {End of Life}

​​​​​The PU-607BDWP-TX Wallplate Transmitter allows uncompressed HDMI signals and IP data to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232 and 2-way IR control functionality over the same CAT5e/6/7 cable. These combined HDMI...

PUV-POH – HDBaseT PoE/PoH Power Injector

The PUV-POH is a power injector designed to send remote power to HDBaseT products. When placed inline between two HDBaseT products, it provides PoE/PoH power in either direction. Two power switches located on the side of the product allow you...