Overview

PUV-2010RX – HDBaseT2 Receiver with USB, LAN, PoH & Audio/ARC pathway {End of Life}

The PU-2010RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), LAN, and USB data signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management and dedicated audio pathways to ensure reliable results in the most demanding installation environments. In addition to the full 5-Play convergence, this device also incorporates OAR (Optical Audio Return) and ARC (Audio Return Channel) functions which enable audio from a compatible display to be routed back from the receiver unit to the transmitter. All audio, video, control, and power are transmitted simultaneously over a single CAT6a/7 cable up to 100m.

This system also allows the connection of any USB host, enabling a USB 2.0 connection to 2 x USB ports, giving the PU-2010RX Receiver the ability to act like a USB hub.

All of these features are incorporated into an ultra slim casing (less than 18mm thick), providing unrivalled flexibility and ease of installation.

  • Supports full HDBaseT™ 2.0 specification signals can be received up to a maximum distance of 100m over CAT6a/7
  • HDCP 2.2, HDMI and DVI compatible
  • HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoH (Power over HDBaseT) and control (Bi-Directional IR & RS-232 pass through)
  • Supported resolutions VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
  • Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
  • Optical audio return (OAR)
  • Supports optical sampling rate up to 48kHz
  • Audio return channel (ARC)
  • Dedicated channel for analogue stereo audio transmission from a compatible transmitter to receiver.
  • Receiver features 2 x USB 2.0 ports
  • Ultra slim chassis design for ease of installation
Inputs  1x RJ45 [1x HDBaseT 2.0 HDMI & Propriety Data]
1x Toslink [1x Optical 2 Channel LPCM]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
2x USB Type A [2x USB Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x Stereo (L/R) Audio Output]
1x Phoenix (3 pin) [1x RS-232]
PSU PoH
Dimensions  270mm [W] x 80mm [D] x 20mm [H] 
Net Weight  0.34kg
Gross Weight  0.45kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...

PRO-F32M – 4K UHD Fiber Transceiver/Matrix With IR & RS232 Control {End of Life}

This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical...

PU-1106TX – HDMI over CAT5e/6 Transmitter with IR Blaster {End of Life}

The PU-1106TX Transmitter allows you to extend HDMI signals over Twin CAT6 cabling infrastructure and use your existing Remote Control to control your source device with the included IR Blaster. The PU-1106TX is specifically designed to be used with the...