Overview

PUV-2600RX – HDBaseT2 Matrix Receiver with USB for the Reverse Power PUV-2600 Series

The PUV-2600RX HDBaseT 2.0 receiver is designed for use in environments that require a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analogue stereo audio breakout is also provided (LPCM 2.0 sources only) allowing audio from the receiver to be integrated with local amplifeir or active speakers. The HDBaseT input not only supports video and audio but also bidirectional Ethernet, RS-232, USB, and IR.

When paired with the EL-2600V (Not Included), up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM or interactive display configuration (Note: Only 1 USB host may be active at a time).

The PUV-2600RX can provide 48V PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front-panel controls, Web GUI, Telnet, and RS-232.

  • HDMI with 18Gbps (600MHz), 3D & 4K video support; HDBaseT 2.0 compatible
  • HDCP 1.x & 2.2 compliant
  • Selectable HDMI and HDBaseT inputs
  • HDMI input supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • HDBaseT input supports resolutions up to 4K@60Hz (YUV 4:2:0, 8-bit)
  • HDMI output supports resolutions up to 4K@60Hz (4:4:4, 8-bit)
  • 2×2 matrix switching (both HDMI outputs are independent)
  • Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, 48V PoH, and control (bidirectional IR/RS-232/USB pass-through)
  • Supports pass-through of LPCM 2.0/5.1/7.1, Bitstream & HD Bitstream audio formats
  • Balanced analogue stereo audio breakout
  • Flexible USB host selection using front panel buttons
  • Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
  • Supports 48V PoH from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)
  • Controllable via front panel buttons, Web GUI, Telnet, and RS-232
  • Recommended TX: EL-2600V or similar HDBaseT2 product
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x RJ45 [1x HDBaseT2 HDMI & Propriety Data]
1x RJ45 [1x LAN Serving]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x USB Type B [1x Propriety Data]
1x 3.5mm Stereo mini-jack [1x RS-232]
Outputs  2x HDMI [2x HDMI Uncompressed AV and Data]
1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
11x Phoenix (3 pin) [11x RS-232]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
3x USB Type A [3x Propriety Data]
PSU 24v/3.75A
Dimensions  158mm [W] x 231mm [D] x 44mm [H] 
Net Weight  0.915kg
Gross Weight  1.40kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2606RX – Standard HDBaseT2 Receiver with USB for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch with USB for the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Transmitter & Multi Format Switch, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

PUV-2200PL-RX – HDBaseT2 LITE Receiver with USB, PoH & Audio pathway

The PUV-2200PL-RX HDMI over single CAT5e/6/7 Receiver can receive uncompressed audio/video, along with HD audio and USB, over a single run of CAT5e/6/7 cable at a distance up to 35 meters. This receiver also features analogue audio input/output and mic...

PUV-2000RX – HDBaseT2 Receiver with LAN, PoH & Audio/ARC pathway {End of Life}

The PUV-2000RX Slimline Receiver supports video resolutions up to 4K UHD, along with HD audio, 2-Way IR, RS-232, PoH (Power over HDBaseT), and LAN signals up to 100m. Utilising the latest HDBaseT™ 2.0 technology, this solution provides advanced signal management...