Overview

PUV-2606RX – Standard HDBaseT2 Receiver for the Reverse Power PUV-2600 Series

The PUV-2606RX HDBaseT2 Receiver is the standard RX within the reverse PoH (RX powers TX) PUV-2600 series, it offers a simple solution for receiving uncompressed HD audio and video, as well as Ethernet and control, via a single run of Cat.6/7 cable over distances of up to 100 meters.

Multiple data and control signal types are supported, including USB 2.0, IR, RS-232 and LAN connections. An independent balanced analogue stereo audio output is also provided to easily de-embed the extended stereo audio signal. The HDBaseT input supports receiving resolutions up to a maximum of 4K@30Hz (4:4:4, 8-bit) or 4K@60Hz (4:2:0, 8-bit) from a compatible HDBaseT Transmitter.

When paired with the standard PUV-2608TX or the more advanced EL-2600V, the PUV-2606RX has switchable USB 2.0 host (Type B) connections available (1 for the remote TX, 1 for the RX) which can connect to devices on up to 6 USB 2.0 (Type A) ports (3 on the TX, 3 on this RX) forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time).

The PUV-2606RX (PSE) can provide PoH (Power over HDBaseT) power to the connected PUV-2600 series HDBaseT Transmitter (PD) (compatible TX’s only), allowing for greater flexibility within different installation scenarios. USB host selection is controlled via a front panel button.

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • HDBaseT 2.0 compatible
  • 1 HDBaseT input and 1 HDMI output
  • 3 USB 2.0 Type A ports and 1 USB 2.0 Type B port
  • Supports HDBaseT input resolutions up to 4K@60Hz (4:2:0, 8-bit)
  • HDMI output supports resolutions up to 4K@60Hz (4:2:0, 8-bit)
  • HDBaseT input receives video, audio, and data over a single Cat.5e/6/7 cable and can reach distances up to 100m/230ft at 4K when using Cat.6a/7
  • HDBaseT feature support: HD Video and Audio, 100BaseT Ethernet, PoH (PSE), and control (bi-directional IR/RS-232/USB 2.0)
  • Supports CEC bypass
  • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI sources
  • Reception of independent analogue stereo audio extension
  • Flexible USB host selection using the front panel button: Note: Multiple USB hosts may be connected at once (up to 2 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
  • Supports local power, or power via PoH from Receiver (PSE) to Transmitter (PD) (compatible Receivers only)
  • Controllable via a front panel button
Inputs 1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x USB Type B [1x USB Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
Outputs 1x HDMI [1x HDMI Uncompressed AV and Data]
1x Phoenix (5 pin) [1x Analogue Stereo (Balanced or Unbalanced)]
3x USB Type A [3x USB Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x LAN Serving]
PSU 24V/2.7A
Dimensions 231mm [W] x 108mm [D] x 25mm [H]
Net Weight 600g
Gross Weight 1300g

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch in the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Transmitter & Multi Format Switch, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

AU-A300-HBT HDBaseT™ 2-Channel Digital AV Receiver (Repeatable) (End of Life)

The AU-A300-HBT is a compact 2 channel digital receiver that is perfect for providing high quality audio distribution in remote AV zones within any multi-room installation. This advanced solution can integrate local HDMI and remote HDBaseT sources from a CYP...

SY-300H-4K22 – HDMI to HDMI Scaler with Audio Embedding & De-Embedding, 4KUHD Support, HDMI2.0, HDCP2.2

This SY-300H-4K22 accepts and outputs a wide range of resolutions up to 4K@60Hz (4:4:4, 8-bit) with simultaneous audio embedding and de-embedding of digital (HDMI or optical) or analogue audio. Integrated EDID and HDCP management allow for control over the connected...

PUV-1H4HPL-AVLC – HDBaseT™ LITE Transmitter 1 x HDMI In, 4 x HDBaseT Outputs + Local HDMI Output, Audio De-embedding (4KHDR, HDCP2.2, HDMI2.0, PoH, AVLC)

The PUV-1H4H-AVLC is a single HDMI Input to 4 x HDBaseT™ Output Distribution Amplifier (Splitter). An advanced solution for splitting and distributing a single HDMI input (up to 4K@60Hz, HDMI 2.0 & HDCP 2.2) to 4 HDBaseT outputs as well...