PUV-2606TX HDBaseT2 Transmitter with USB for the Reverse Power PoH
PUV-2606TX - Standard HDBaseT2 Transmitter with USB for the Reverse Power PUV-2600 Series or EL-8400VA
PUV-2606TX - Standard HDBaseT2 Transmitter with USB for the Reverse Power PUV-2600 Series or EL-8400VA
PUV-2606TX - Standard HDBaseT2 Transmitter with USB for the Reverse Power PUV-2600 Series or EL-8400VA

Overview

PUV-2606TX – Standard HDBaseT2 Transmitter with USB for the Reverse Power PUV-2600 Series or EL-8400VA

The PUV-2606TX HDBaseT2 Transmitter with USB for the Reverse Power PoH (RX powers TX), audio embedding and all the features of HDBaseT2 featured in all our PUV-2600 range along with its primary HDMI and analogue audio inputs.

The PUV-2606TX can send uncompressed audio/video along with Ethernet, USB, IR, and RS-232 over a single Cat.6/7 cable up to a distance of 100m. The HDMI input supports  resolutions up to 4K@60Hz (4:2:0, 8-bit). The minijack 3.5mm stereo audio input, may also be embedded into the HDBaseT output signal. Despite HDBaseT’s 10.2Gbps bandwidth limitation, high bandwidth 4K UHD+ HDMI video sources, up to and including 4K@60Hz (4:2:0, 8-bit).

Whether paired with the standard PUV-2606RX or the more advanced matrix receiver, the PUV-2600RX has a total of 3 selectable USB host (Type-B/C) connections available which provide access to 5 USB device (Type-A) ports forming a highly flexible KVM extension configuration (Note: Only 1 USB host may be active at a time). Additionally, the USB Type-C input can provide power (up to 60W) to any connected device (only available when the unit is powered locally). All USB ports on the transmitter support up to USB 3.0 data transfer speeds.

Additional functionality such as advanced EDID management, HDCP management, and basic signal event automation (which can automatically send customised RS-232 or CEC commands to an external device) are also available via the webGUI or via the control commands clearly listed in the product manual.

The PUV-2606TX HDBaseT2 Transmitter with USB for the Reverse Power PoH can be powered locally with a 24V power supply or remotely via PoH (Power over HDBaseT) from a compatible PUV-2600 series HDBaseT receiver, allowing for greater flexibility in installations. Via the front panel buttons you can switch USB host, can be configured and controlled via webGUI, Telnet, and RS-232.

 

  • HDMI 2.0, DisplayPort 1.4, and DVI 1.0 compliant
  • HDCP 1.x and 2.2 compliant
  • 1 HDBaseT output
  • Supports up to 4K UHD+ (18Gbps, 4K@60Hz 4:4:4, 8-bit) video input
  • Supports Deep Colour input up to 12-bit
  • Supports 10-bit and 12-bit HDR (High Dynamic Range) input
  • HDBaseT output supports resolutions up to 4K@60Hz (4:2:0, 8-bit) with automatic down conversion to 1080p for any sources that exceed HDBaseT’s bandwidth limitations, such as 4K@60Hz (4:4:4, 8-bit) or 4K@any (10/12-bit) sources
  • Supported HDBaseT feature set: HD Video & Audio, PoH (PD), and Control Extension (Bi-directional IR/RS-232/USB)
  • Supports pass-through of many audio formats including 8 channel LPCM, Bitstream, and HD Bitstream
  • Analogue audio may be embedded to HDMI input
  • EDID management with internal or external EDID options
  • Basic signal event automation (via RS-232 or CEC)
  • Supports optionally being powered via PoH from a compatible HDBaseT receiver
  • Controllable via front panel button, WebGUI, Telnet, or RS-232
Inputs 1x HDMI [2x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
1x Phoenix (3 pin) [1x Console port RS-232]
1x Phoenix (3 pin) [1x Bypass RS-232]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x RJ45 [1x IP Control Propriety Data]
1x USB 3 Type B [1x USB Power & Data]
Outputs 1x RJ45 [1x HDBaseT HDMI & Propriety Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
2x USB Type A [2x USB Propriety Data]
POE PSU PoH
PSU 24V/3.75A
Dimensions 231.5mm [W] x 25mm [H] x 108mm [D]
Net Weight 660g
Gross Weight 960g
Product Stock Category Core Product

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PUV-2608TX – HDBaseT2 Transmitter & Multi-Format Switch with USB for the Reverse Power PUV-2600 Series

The PUV-2608TX HDBaseT2 Multi-Format Switch TX with USB, with two HDMI, a DisplayPort, and USB-C inputs, USB connectivity, audio embedding and all the features of HDBaseT2 plus the reverse PoH (RX powers TX) featured in all our PUV-2600 range. The...

PUV-1630TXWP-UK – HDBaseT1 switching Wallplate Transmitter (UK version) for the Reverse Power PUV-1600 Series

The PUV-1630TXWP-UK HDBaseT1 switching Wallplate Transmitter which allows uncompressed HDMI and VGA signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of analogue audio em-bedding and a LAN connection over the same CAT5e/6/7 cable....

PUV-1650TX – HDBaseT1 multi-format switching Transmitter with Trigger port for the Reverse Power PUV-1600 Series

The PUV-1650TX HDBaseT1 multi-format switching Transmitter  has been designed with collaboration in mind, it’s the perfect turnkey solution for extending and switching video in commercial applications. The PUV-1650TX/RX not only provide total AV conversion and extension, they also add a...

PUV-1660TTX – HDBaseT1 multi-format switching Tabletop Transmitter for the Reverse Power PUV-1600 Series

The PUV-1660TTX HDBaseT1 multi-format switching Tabletop Transmitter is a reverse powered unit enabling a single CAT cable to power and transmit different laptop signals. Flexible meeting rooms are also becoming more commonplace, which is where the PUV-1660TTX provides the perfect...