SDV-CS8 – AV over SDVoE Master Controller and Configurator

​The SDV-CS8 is a powerful and flexible solution for controlling multiple SDVoE extenders within same network. The SDV-CS8 provides effortless configuration of the extenders (Transmitters, Receivers or Transceivers) to easily define and configure channel routing using the WebGUI. It is also possible to define and switch routes using customized groups or presets over multiple video zones.

Additionally, this unit supports controlling the matrix, video wall, and multiviewer modes of connected SDVoE extenders. Dependent on the scaler mode, this product supports instant switching between selected video transmitters. The settings of all connected Transmitter/Receiver units, including IP address, Subnet mask and extender status are clearly displayed within the Web GUI. The Web GUI is easily accessed via a web browser over a normal network connection or by connecting an HDMI display and USB keyboard & mouse to the SDV-CS8. A trigger input interface is also provided to allow the easy addition of a remote control keypad, or other trigger-supporting products, which can be installed within a lectern or table within a conference room or classroom environment. This interface can allow the user to activate stored presets with the simple press of a button. Standard control is available via Web GUI (remote or local), RS-232, Telnet, IR Remote and triggers.

  • Enables the management and configuration of multiple compatible SDVoE extenders through a single Web GUI
  •  Control over matrix, video wall, and multi-viewer modes using Web GUI pre-sets 
  • Rapid Switching time between transmitters
  •  Definable display groups 
  • Web GUI clearly displays the status of all connected Transmitters and Receivers, including IP address, channel selection
  • HDMI output displays the Web GUI and system status 
  • Dual LAN ports enable control over the local network as well as independent access to the controller separate to the distribution network
  •  Supports the use of a USB mouse and keyboard providing control of the Web GUI (Optional)
  • Can be powered directly by Power over Ethernet (PoE) when connected to an Ethernet switch that follows the 802.3af PoE standard
  • Trigger Control Keypad support for simple single-button pre-set activation
  • Standard control is available via Web GUI (remote or local), RS-232, Telnet, IR Remote and triggers 
Inputs  2x RJ45 [2x Individual Network IP]
1x Phoenix (3 pin) [1x RS-232]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (10 pin) [1x Trigger In (8)]
1x USB Type A [1x Service Port Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
PSU 5V/2.6A
Dimensions  135mm [W] x 117mm [D] x 25mm [H] 
Net Weight  0.64kg
Gross Weight  1.066kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

IP-TG01 – In-Table Single Trigger Button

The IP-TG01 is a dedicated in-table single Trigger Button that can be used in both CYP’s Control range (CR-) and our 1G IP range (IP-). The trigger can be used to alter a receiving transmitter source channel in CYP’s 1G...

IP-CS7 – AV over IP System Controller and Configurator

The IP-CS7 is a powerful and flexible installation solution for controlling the CYP range of IP-6000’s and IP-7000’s. It is capable of simultaneously managing multiple IP extenders across the same network. The unit only requires installation within your network to...

CR-UDC1 – Universal Device Controller

The CR-UDC1 is a powerful and flexible solution for controlling a wide range of controllable equipment within same local network. With this unit connected to the local network, natively supported devices can be automatically detected, monitored, and controlled via a...

CR-CS2 – IP to Relay, IR & RS232 Controller

The CR-CS2 is a simple Control System for a wide variety of connected devices. It has 16 user defined macro events stored within the unit activated via the We bGUI or by telnet, eight of which can also be activated...