Overview

SDV-CTRX – SDVoE 4KUHD (6G) HDMI over CAT (10G) Transceiver

The SDV-CTRX is designed to transmit, 4K HDR (6G) signals over a 10G IP Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4KHDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit colour and multi-channel HD Bitstream audio can be transmitted in pass-through mode. Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.

Multiple Transceivers may be combined with one or more 10-Gigabit Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (control hardware required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.

  • HDMI 2.0 and DVI 1.0 compatible 
  • HDCP 2.2 and HDCP 1.x compliant 
  • Can be configured to function as either a Transmitter or a Receiver 
  • 1 x HDMI and 1 x DisplayPort input
  • 1 HDMI output (Functions as local monitor output in Transmitter mode) 
  • 1 x analogue stereo jack (switchable between input/output mode) 
  • IP switchable with minimum latency (requires optional control hardware or control software) 
  • Ultra-light compression, lossless for most content 
  • Independent breakaway A/V matrix switching (requires optional control centre or control software) 
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only) 
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources 
  • Analogue stereo audio extension, embedding and de-embedding (insertion and extraction requires optional control hardware or control software)
  • Bi-directional LAN, IR, RS-232 & USB 2.0 extension 
  • Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae
  • Basic configuration via front panel buttons with an On-Screen Display (OSD) 
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x TX mode - analogue  Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x Reserved for future use RS-232]
1x RJ45 [1x GbE LAN Serving]
1x USB 3 Type B [1x Service Port Power & Data]
1x RJ45 [1x RX mode - SDVoE CAT  HDMI & Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x 3.5mm Stereo mini-jack [1x RX mode - Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
1x RJ45 [1x TX mode - SDVoE CAT HDMI & Propriety Data]
PSU 12V/3A
Dimensions  231mm [W] x 108mm [D] x 25mm [H] 
Net Weight  0.62kg
Gross Weight  1.40kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDV-FTRX – SDVoE 4KUHD (6G) HDMI over Fiber Transceiver

The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using...

SDV-FTRX-U – 4K UHD+ HDMI/DisplayPort over IP Transceiver with USB Extension

The SDV-FTRX-U is designed for high-quality, IP routable, AV extension with minimum latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme...

SDV-C2-RX – UHD+ HDMI AV over IP Receiver

The SDV-C2-RX is designed for high-quality, IP routable, AV extension over a 10G IP Network with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or...

SDV-C2-TX – UHD+ 2×1 HDMI/DP to HDMI SDVoE Transmitter

The SDV-C2-TX is designed for high-quality, IP routable, AV extension over a 10G IP Network with minimum latency. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or...