SDV-FTRX-BD SDVoE Full 4K 10G AV over IP Bi-directional Fiber Transceiver
SDV-FTRX-BD - SDVoE Full 4K 10G AV over IP Bi-directional Fiber Based Transceiver with USB Extension
SDV-FTRX-BD - SDVoE Full 4K 10G AV over IP Bi-directional Fiber Based Transceiver with USB Extension
SDV-FTRX-BD - SDVoE Full 4K 10G AV over IP Bi-directional Fiber Based Transceiver with USB Extension

Overview

SDV-FTRX-BD – SDVoE Full 4K 10G AV over IP Bi-directional Fiber Based Transceiver with USB Extension

The SDV-FTRX-BD SDVoE Full 4K 10G AV over IP Bi-directional Fiber Transceiver is designed for high-quality, IP routable, AV extension with minimum latency for the SDVoE range of 10G AV over IP. The SDV-FTRX-BD SDVoE Full 4K 10G AV over IP Bi-directional Fiber Transceiver is capable of simultaneous bi-directional AV extension, enhancing the flexibility of any installation. By using a sophisticated ultra-light compression scheme (lossless for most content) it’s a great solution for extending 4K audio/video streams (HDMI or Display Port) and data.

Advanced HDMI content such as HDR (High Dynamic Range), 10-bit colour and multi-channel HD Bitstream audio can be transmitted in pass-through mode. With the use of standard Fiber cable allows for point-to-point transmission of the video signal up to 300m via supplied Multi-Mode fiber module. Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB 2.0, and Ethernet.

When combined with the optional IP Master Controller (SDV-CS8), the functionality of the Transceiver expands exponentially. Multiple Transceivers or SDVoE TX/RXs may be combined with one or more 10-Gigabit Ethernet switches and the units can be used together to form a distributed video matrix, with multi-view and video wall configuration adding to their flexibility in large event installations.

The integrated USB hub of each Transceiver can function as a simple point to point KVM extension or freely routed between any two endpoints. This type of USB KVM routing flexibility enables a wide range of multi-user, control room, or on-demand installation scenarios. The built-in EDID and HDCP management functionality enables the unit to fit into every situation.

A specialised use of the SDV-FTRX-BD is for the creation of true multi-view signals within a video wall arrangement, simply add one SDV-FTRX-BD to any SDVoE system and through its bi-directional nature any user can simply directly connect the HDMI I/O, setting up the receiver side to a Multi-view arrangement and routing the transmitter side onto any video wall arrangement, saving having to purchase very expensive video wall processors.

Basic configuration of the unit can be achieved via front panel buttons with an OSD (On-Screen Display). Advanced control requires the optional IP Master Controller (SDV-CS8).

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • 1 HDMI and 1 DisplayPort input
  • 1 HDMI output
  • 1 analog stereo input & 1 analog stereo output
  • 2 USB 2.0 (Type-A) ports and 1 USB 2.0 (Mini-B) port
  • Transceiver supports simultaneous bi-directional AV signal extension
  • IP switchable with minimum latency
  • Ultra-light compression, lossless for most content
  • Extension up to 30km (maximum distance depends on the SFP+ module and type of fiber used)
  • Supports independent breakaway A/V matrix switching with minimal latency, video wall generation, and multiview compositing (requires SDV-CS8)
  • Supports pass-through of 10/12-bit HDR sources
  • Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI or DP sources
  • Analog stereo audio extension, insertion and extraction (insertion and extraction requires optional IP Master Controller, the SDV-CS8)
  • Bi-directional AV, IR, RS-232, USB 2.0, and Ethernet extension
  • Supports a special Simultaneous Mode for USB extension allowing a host connected to a single transceiver to connect to up to 7 transceivers with USB devices connected (Mass storage devices are not supported in this mode. Requires optional IP Master Controller)
  • Basic configuration via front panel buttons with an OS
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x Display Port [1x Uncompressed AV]
1x SFP + [Shared simultaneous port - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x RS-232]
1x RJ45 [1x LAN Serving]
1x USB Mini B [1x USB host & service port Propriety Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x SFP + [Shared simultaneous port - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x Analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
   
PSU  12V/3A
Dimensions  231.5mm [W] x 25mm [H] x 108mm [D]
Net Weight  700g
Gross Weight  1.5kg
Product Stock Category Core Product

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

EL-44M-VW – 4K Seamless Matrix and Multi-viewer

​The EL-44M-VW HDMI Matrix multi-viewer allows the signal from 4 different input sources to be freely selected and arranged on 4 displays, providing output modes (Matrix, Multiview and TV Wall) for various applications. It is an ideal solution for monitoring...

OR-442USB – 4×4+2 USB3.2 Data Matrix Switch

This OR-442USB 4×4+2 USB3.2 Data Matrix Switch is a 3.2 Gen 2 4×4 USB data switch that provides a simple and efficient solution for plug-and-play, point-to-point, and sharing USB devices. With the ability to connect 4 USB 3.2 Gen 2...

CR-KP5-R – 4-Button Keypad Controller & Rotary Dial with push button

The CR-KP5-R Keypad Controller is a versatile and useful control product for both system integrators and smart home users. It can send commands to any Ethernet-controlled device in your system. Equipped with 4 physical macro buttons and a rotary encoder...

SDV-C1H-RX – SDVoE Full 4K 10G AV over IP CAT-Based Small Form Factor Receiver

SDV-C1H-RX 10G SDVoE receiver  is designed for high-quality, IP routable, AV extension up to 4K@60 4:4:4 with minimum latency. SDV-C1H-RX uses 10G Ethernet ports, and Cat.6A cable to allow transmission of the video signal up to 100m. Advanced HDMI content...