SDV-FTRX - SDVoE Full 4K 10G AV over IP Fiber based Transceiver {End of Life}
SDV-FTRX - SDVoE Full 4K 10G AV over IP Fiber based Transceiver {End of Life}
SDV-FTRX - SDVoE Full 4K 10G AV over IP Fiber based Transceiver {End of Life}
SDV-FTRX - SDVoE Full 4K 10G AV over IP Fiber based Transceiver {End of Life}

Overview

SDV-FTRX – SDVoE Full 4K 10G AV over IP Fiber based Transceiver {End of Life}

The SDV-FTRX is designed to transmit, 4KHDR (6G) signals over a 10G IP Fiber Network with almost zero latency. Every Transceiver can be configured to function as either a Transmitter or a Receiver, providing additional flexibility for any installation. Using a sophisticated ultra-light compression (lossless for most content) it’s the perfect solution for extending 4K HDR video (HDMI or DisplayPort) and data. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit colour and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used). Multiple control and data signals may also be transmitted along with the audio and video, including IR, (RS-232 Future Development) USB (for KVM) and Ethernet.

Multiple Transceivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large event installations (Control Hardware Required). The built-in EDID and HDCP management offers additional installation flexibility. Basic configuration of the unit can be achieved via front panel buttons with an On-Screen Display (OSD). Advanced control requires optional control software and a LAN connection.

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.x compliant
  • Can be configured to function as either a Transmitter or a Receiver
  • 1 HDMI and 1 DisplayPort input
  • 1 HDMI output (Functions as local monitor output in Transmitter mode)
  • 1 analogue stereo jack (switchable between input/output mode)
  • IP switchable with minimum latency (requires optional control centre or control software)
  • Ultra-light compression, lossless for most content
  • Extension up to 30km (depending on the fiber module used)
  • Independent breakaway A/V matrix switching (requires optional control centre or control software)
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
  • Analogue stereo audio extension, insertion and extraction (insertion and extraction requires optional control centre or control software)
  • Bi-directional LAN, IR, RS-232 & USB 2.0 extension
  • Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI, IEEE 802.3ae, compatible SFP+ fiber modules
  • Basic configuration via front panel buttons with an On-Screen Display (OSD)
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x SFP + [1x RX Mode - SDVoE fiber  LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x TX mode - analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x Phoenix (3 pin) [1x Reserved for future use  RS-232]
1x Display Port [1x Uncompressed AV]
1x RJ45 [1x GbE  LAN Serving]
1x USB 3 Type B [1x Service Port Power & Data]
Outputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x SFP + [1x TX mode - SDVoE fiber LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x RX mode - analogue Stereo(L/R)]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU 12V/3A
Dimensions  231.5mm [W] x 25mm [H] x 158mm [D]
Net Weight  940g
Gross Weight  2.12kg

You may also like…

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

PU-515PL-KIT – HDBaseT1 LITE (60m) Transmitter & Receiver Kit with PoC {End of Life}

​​The PU-515PL-KIT allows uncompressed HDMI signals to be transmitted over a Single CAT5e/6/7 cable. This solution has the added features of RS-232, 2-way IR control, and Power over Cable (PoC) functionality over the same CAT5e/6/7 cable. These combined HDMI and...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...

PRO-F32M – 4K UHD Fiber Transceiver/Matrix With IR & RS232 Control {End of Life}

This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical...