SDV-FTX – SDVoE Full 4K 10G AV over IP Fiber based Transmitter {End of Life}

The SDV-FRX/FTX Transmitter and Receiver set are designed to deliver high-quality, IP routable, AV extension with minimum latency. By using a sophisticated ultra-light compression technology (lossless for most content) it’s the perfect solution for extending 4K audio/video signals (HDMI or DisplayPort) and data over long distance. Advanced HDMI content such as HDR (High Dynamic Range), 10-bit colour and multi-channel HD Bitstream audio can be transmitted in pass-through mode. The use of interchangeable, field replaceable, SFP+ modules allows for transmission distances of up to 30km (Maximum transmission distance depends on the SFP+ modules used.). Multiple control and data signals may also be transmitted along with the audio and video, including IR, RS-232, USB (for KVM) and Ethernet.

When combined with the optional control software, the functionality of the extenders expands exponentially. Multiple Transmitters and Receivers may be combined with one or more 10Gb fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multi-viewer system, or a video wall system adding to their flexibility in large commercial installations.

  • HDMI 2.0 and DVI 1.0 compatible
  • HDCP 2.2 and HDCP 1.4 compliant
  • IP switchable with minimum latency (requires optional control centre/software)
  • Ultra-light compression, lossless for most content
  • SDV Alliance Approved
  • Extend up to 30km (depending on the fiber module used)
  • Independent breakaway A/V matrix switching (requires optional control software)
  • Video wall generation (requires optional control software)
  • Multi-view configuration (requires optional control software)
  • Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Genlock mode only)
  • Supports pass-through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI or DisplayPort sources
  • Analogue stereo audio extension, Embedding & De-embedding (requires optional control software)
  • Bi-directional RS-232, IR, & USB 2.0 extension
  • Data Transmission interfaces with 10 gigabit Ethernet via XFI, IEEE 802.3ae, compatible SFP+ fibre modules
Inputs  1x HDMI [1x HDMI Uncompressed AV and Data]
1x Display Port [1x Uncompressed AV]
1x 3.5mm Stereo mini-jack [1x Analogue  Stereo(L/R)]
1x 9pin Dsub [1x RS-232 Data]
1x 3.5mm Stereo mini-jack [1x Infra Red Receiver]
1x USB Type B [1x Propriety Data]
Outputs  1x SFP + [1x Fiber  LC/PC-LC/PC Duplex MM OM3]
1x 3.5mm Stereo mini-jack [1x Infra Red Emitter]
PSU 12V/3A
Dimensions  166mm [W] x 213mm [D] x 44mm [H] 
Net Weight  1.063kg
Gross Weight  1.663kg

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

SDM-SDV-FTRX – SDVoE Full 4K 10G AV Over IP Fiber Transceiver SDM Module…In Development

The SDM-SDV-FTRX is a SDVoE transceiver module card with Fiber cable connection for use with CYP’s SDM module range. It is designed for high quality 4K audio and video signals extension with minimum latency. Users could easily slot the module...

EL-5500-HBT – 8 x 4 HDBaseT™/HDMI/VGA Presentation Switch (with Switchable Digital Bypass Output) {End of Life}

The EL-5500-HBT is an advanced rack mountable HDBaseT, HDMI, VGA, Composite, and Component presentation switcher. This device can scale and switch eight input sources to it’s two HDMI outputs and a single HDBaseT output, with their associated audio signals to...

OR-HD62CD – 6 x 2 UHD HDMI Matrix Switch with Audio De-Embedding {End of Life}

​The OR-HD62CD allows HDMI signals to be routed from any of the six connected HDMI sources for display on two connected HDMI displays. With fast switching technology this device dramatically improves the sync time to the connected HDMI displays over...

PRO-F32M – 4K UHD Fiber Transceiver/Matrix With IR & RS232 Control {End of Life}

This combined Transceiver/Matrix enables the routing of up to three HDMI input signals (2 x 18Gbps HDMI inputs and 1 x 10.2Gbps optical fiber input) to any of the two outputs (1 x 18Gbps HDMI and 1 x 10.2Gbps optical...