Overview

CR-IRL – USB Dongle IR Remote Control Learner

​The CR-IRL Infrared Learner is a versatile tool for all your control system design needs. This compact yet functional unit can convert your analogue IR commands into digital data and store it for many uses. With the simple software tool the user can store the commands from multiple IR remote controls in a single convenient location such as a laptop for later recall as required. The unit not only learns the IR command but it can also test that the learning was successful by re-transmitting the command to prove that it has been learned correctly. It is compatible with a wide range of IR frequencies and source devices.

Primarily used for capturing 3rd party IR data for integration into CYP software APP’s.
  • Receives and transmit an IR command to confirm successful learning
  • Converts an IR signal into digital data for control system usage
  • Compatible with a wide range of IR format and IR frequencies
  • Compact USB dongle design
  • Simple software installation
  • Required for IR programming for our PUV-44XPL-AVLC APP
Inputs 1x Built In [1x Infra Red Receiver]
Outputs 1x USB Type A [1x USB connection Propriety Data]
1x Built In [1x Infra Red Emitter]
PSU: USB powered
Dimensions 25mm [W] x 85mm [D] x 15mm [H]
Net Weight 20g
Gross Weight 72g

Here’s an idea for a perfect pairing...

Did you know that this product also works with the following CYP products...

CR-TG02 – 1 x 2 Trigger Button Splitter (for single button trigger IP-TG01)

Use the CR-TG02 with CYP’s CR-CS4 Hardware Control I/O Centre when you wish to use more than 8 single trigger buttons (IP-TG01) in the system. The CR-TG02 is used to allow two single trigger buttons (IP-TG01) to be connected to...

PU-IR01-KIT – Infra Red over CAT5e/6 Extender Set

The IR Extender and the Repeater set is perfect for controlling IR controlled source equipment over long distances. Up to five sources can be controlled using this extender set. Two sources can be controlled located locally to the repeater, whilst...

PU-USB-AL-KIT – USB 2.0, Audio & LAN Over CAT Transmitter Receiver Kit

The PU-USB-AL-KIT Transceiver is a point-to-point signal extender for USB 2.0, LAN and Analogue Audio over CAT6/7 cables. Ideal for extending USB peripherals from the table in a conference room to wider video conferencing systems such as Zoom, Microsoft Teams...

PU-USB2-KIT – USB 2.0 Over CAT Transmitter Receiver Kit

The PU-USB2-KIT is a low-cost transmitter and receiver pair for USB data extension. This USB 2.0 extender kit provides a simple way to extend USB 2.0 signals over a single category cable up to 50 metres with high quality, uncompressed,...